Textile Information | Oil market structure reshapes + New fiber industry enters a growth phase. How can textile enterprises achieve steady progress? 2026/5/15

In April, as the production pace of domestic textile enterprises steadily accelerated, the replenishment demands of downstream weaving and garment manufacturing enterprises were concentratedly released. Coupled with the steady recovery of the domestic demand market, the demand for imported raw materials such as high-end fabrics and special yarns soared significantly. The high growth of import data fully confirmed the continuous recovery of the production vitality of the domestic textile industry and the increasingly full operation of the upstream and downstream of the industrial chain. Compared with finished garments, textile intermediate products such as yarns and fabrics have mature technical processes and complete supply chain support, which are suitable for the procurement needs of textile weaving and manufacturing enterprises in many countries around the world. International oil prices have exceeded 100, putting pressure on industry costs. As of May 11, 2026, the price of WTI crude oil once again surpassed the $100 per barrel mark. Geopolitical tensions and concerns over global crude oil supply continue to escalate, causing significant cost impacts on the textile and apparel industry. As petroleum is the core upstream raw material for chemical fibers, an increase in its price will directly push up the purchase costs of chemical fiber raw materials such as polyester and nylon. And chemical fiber raw materials are the core raw materials in textile production, and price fluctuations will quickly spread throughout the entire industry chain. At the same time, the increase in oil prices has also led to a simultaneous rise in costs for all stages of the process, including weaving, dyeing and processing, as well as goods transportation. This has further squeezed the profit margins of textile and clothing enterprises. Currently, small and medium-sized enterprises in the industry are generally facing difficulties in cost control, and the pressure to make profits continues to increase, becoming the core factor restricting the recovery of industry profits. Overall, in April 2026, China's textile and apparel exports demonstrated strong overall resilience. The structural pattern of intermediate products strengthening while finished products weakening was clearly evident. Textile exports continued to grow steadily, and domestic raw material imports showed an improvement. This laid a solid foundation for the industry's stable operation. However, high fluctuations in international oil prices, weak recovery in overseas terminal consumption, and intensified competition in the low-end market will remain key variables affecting the industry's operation in the second quarter and the second half of the year. In the future, the industry will continue to undergo transformation and upgrading amid fluctuations in costs and market adjustments. The product innovation capabilities, cost control capabilities, and global market adaptation capabilities of enterprises will become the core competitiveness for navigating industry cycles and achieving long-term development. The United Arab Emirates' withdrawal from OPEC has reshaped the oil market. The United Arab Emirates has officially withdrawn from the Organization of the Petroleum Exporting Countries (OPEC), completely breaking free from the long-standing production quota restrictions and initiating a new model of free oil production and independent pricing for its crude oil exports. This withdrawal from the organization was not an impulsive decision driven by short-term market speculation, but rather a necessary outcome based on the UAE's long-term capacity contradictions and its alignment with its own development strategy. The core objective is to fully unleash its low-cost and high-quality domestic production capacity and to aggressively seize global crude oil market share. Compared with traditional oil-producing countries, the crude oil of the United Arab Emirates has core competitive advantages such as low extraction costs, stable quality, and flexible transportation. After withdrawing from OPEC, its vast amount of low-cost crude oil continuously flooded into the global market. This not only broke the original international crude oil pricing system but also, through the entire industrial chain, had a profound impact on the textile and chemical fiber industries that rely on crude oil as a core raw material. This move directly broke the international crude oil pricing system long controlled by OPEC, causing the international crude oil prices to fluctuate and weaken, and bringing phased cost benefits to downstream industries such as chemicals, chemical fibers, and textiles that are related to crude oil. Domestic chemical fibers have weakened, easing the pressure on textile enterprises. Driven by the weak and fluctuating trend of international oil prices, the domestic prices of chemical fiber raw materials have continued to decline. The quotations for mainstream textile raw materials such as polyester filament, short fiber, and polyester chips have steadily dropped, effectively alleviating the long-term operational difficulties faced by domestic textile enterprises, including high raw material costs, heavy energy consumption pressure, and narrow profit margins. For weaving, home textile, and garment processing enterprises, the decline in raw material prices has significantly reduced inventory costs and effectively alleviated the production and stock preparation pressure on the enterprises. As the traditional textile season approaches in the second half of the year, enterprises can flexibly adjust product prices and accurately seize market orders, significantly enhancing their operational flexibility. Traditional fibers are experiencing a decline in demand, while new fibers are seeing an increase in popularity. In 2026, the textile industry is shifting from being driven by scale to being driven by innovation. New materials and fibers have become the core engines for industry upgrading. The industry is closely following the trends of greenness, functionality, intelligence, and high value. The costs of traditional fibers are under pressure, while the demand for new fibers has soared. Leading enterprises are leading the way with technology, while small and medium-sized manufacturers are accelerating their transformation. The new materials sector has become the core growth pole of the industry. In the first quarter of 2026, the traditional textile fiber market showed a differentiated trend of "cotton being strong while polyester being weak". Under the dual impetus of the "dual carbon" policy and consumption upgrading, the demand for bio-based, recycled and functional fibers has experienced explosive growth. Data shows that the market size of new textile materials in China is expected to exceed 450 billion yuan by 2026, with a compound annual growth rate of over 12%, and the proportion of green and environmentally friendly materials will increase to over 35%. New fibers have continuously improved their premium pricing capabilities due to their technological barriers and performance advantages. For example, the price of bio-based PLA fibers is 30%-50% higher than that of ordinary polyester, and graphene functional fibers have a premium increase of over 80%. The Xinfang City market feedback indicates that downstream brand customers have significantly increased their acceptance of new materials and are willing to pay premiums for environmental protection and functional attributes, promoting the reconfiguration of the industrial chain value from "processing and manufacturing" to "material research + brand operation" in both directions.  【Declaration】The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify promptly and contact for deletion.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Changde held a symposium for researching the light industry and textile industry chain. 2026/5/14

After carefully listening to the reports on the relevant work situation and the speeches of enterprise representatives from the textile and clothing, as well as the sports shoe manufacturing industries, Luo Yijun pointed out that the textile and clothing industry in Changde has a glorious history of development. In recent years, the textile and clothing, as well as the sports shoe manufacturing industries have achieved remarkable progress. However, there are still some problems and deficiencies in terms of scale, brand, and supporting facilities. We must analyze the pros and cons dialectically, firmly maintain the development confidence, grasp the development trend, and jointly promote the high-quality development of the industry.Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us in time and we will delete it.......

Maintenance methods for polypropylene spinning machines in high-temperature summer conditions 2026/5/14

During the operation of the summer polypropylene spinning machine, problems such as overheating, accelerated component wear, and increased breakage of the spun fibers are prone to occur. By taking targeted maintenance and response measures, production interruptions can be effectively reduced.For the overheating issue of the equipment, optimizing the cooling conditions should be given priority. Clean the dust accumulated on the motor cooling fans and cooling ports to ensure the cooling efficiency. Check the operation status of the workshop ventilation equipment and replace the aged filters in time to ensure air circulation and lower the environmental temperature. If the temperature of the motor or the box is too high, immediately stop the machine to cool down, check whether it is caused by excessive load or poor lubrication, and handle the problem before restarting the equipment.Specialized maintenance for key components should be strengthened. For the spinning box, monitor the temperature of each area daily to ensure that the fluctuations are within a reasonable range, avoiding abnormal temperature causing poor melt flow and affecting the strength of the fiber. The guide wire system needs to be checked in particular, checking whether the guide wire wheels rotate smoothly, whether the ceramic parts have chipped or scratched, and replacing them in time to prevent scratches on the fiber. The winding device should be calibrated regularly, checking the operation status of the horizontal moving mechanism, adjusting the contact roller pressure, to avoid forming problems such as bulging or sagging on the spun cake.The frequency of inspections during high-temperature periods should be increased. During the summer noon when the temperature is high, arrange personnel to conduct inspections every 2-3 hours, focusing on the temperature of the motor, control cabinet, and spinning area, record key parameters, and handle any abnormalities promptly. Shift the high-load processes to the cooler times in the morning and evening, reducing the continuous load of the equipment under high temperatures. At the same time, keep good operation records, detail the abnormal phenomena such as increased breakage and pressure fluctuations, to facilitate subsequent troubleshooting.Prevent moisture and corrosion. During the summer, the air humidity is high, which can cause electrical components to get damp and short-circuit. Regularly check the insulation performance of the motor, and take moisture-proof sealing treatment for the control cabinet. Regularly wipe the metal parts of the equipment, and apply anti-rust agents when necessary to avoid accelerated rusting in the humid environment. Strengthen the maintenance of the raw material drying system, weekly clean the filter and heating tubes of the dryer, and calibrate the temperature sensors monthly to prevent excessive moisture content in the raw materials from causing spinning faults.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Praise the beauty of labor, pay tribute to the power of craftsmanship | Fubang Chemical Fiber Machinery wishes all workers a happy May Day! 2026/4/30

With hands as pens and sweat as inkLabor builds a glorious chapter, and every mountain and river faces the sun.Salute every bit of enthusiasm and every sense of responsibility.To all the hardworking creators, we say, "Thank you for your hard work!" With labor as the foundation and craftsmanship as the guide, we march towards a new journey. May is the festival of laborers and a season where toil and harvest interweave. In this vibrant and beautiful time, Fubang Chemical Fiber Machinery Factory extends its most sincere festival greetings to all the employees working on the front lines!Labor creates value, and craftsmanship forges quality. Fubang Chemical Fiber Machinery has been deeply engaged in the research, development, production and service of polypropylene spinning machines. Every achievement of Fubang is inscribed with the footprints of all its employees' hard work. In the workshop, every precise adjustment and every strict quality check are the ultimate pursuit of quality; in research and development, every technological breakthrough and every innovative upgrade are the tireless dedication to professionalism; in service, every prompt response and every full support are the solemn fulfillment of responsibility. Even in ordinary positions, there is extraordinary perseverance. It is this dedication and effort that have forged the quality foundation of Fubang. Salute to Perseverance, Praise to CraftsmanshipThis May Day, we pay tribute to every act of perseverance and every effort made. We salute the members of Fubang, who interpret responsibility through perseverance and achieve value through hard work; we salute our colleagues in the industry, who delve deeply into their fields with craftsmanship and drive progress through dedication; we salute our clients and partners, who walk hand in hand with trust and embark on new chapters together. Every labor deserves respect, and every act of perseverance shines with brilliance.Labor is the most glorious, and striving is the most beautiful. On this May Day, we wish all workers to live up to the time and themselves, to gather strength during rest and feel warmth in companionship.Finally, Changzhou Fubang Chemical Fiber Machinery Factory once again salutes every worker who creates the extraordinary in ordinary positions! We salute every colleague who works diligently in the chemical fiber machinery industry! We wish everyone a happy May Day, smooth work, and a happy family!Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The Symposium on the Integrated and Innovative Development of Artificial Intelligence and the Textile Industry was held. 2026/4/28

On April 22, 2026, a symposium on the integrated and innovative development of artificial intelligence and the textile industry was successfully held at the China Academy of Information and Communications Technology. The meeting focused on the key technologies, core pain points, and practical applications of AI enabling the transformation and upgrading of the textile industry, and gathered consensus from multiple parties including academia, industry, research, and application. This seminar was guided by the Textile Division of the Consumer Goods Industry Department of the Ministry of Industry and Information Technology, and was hosted by the Industrial Internet and Internet of Things Research Institute of China Academy of Information and Communications Technology. More than 20 experts from the China Textile Industry Federation, Donghua University, Wuhan Textile University, Hangzhou Mansuilie, etc. attended the meeting. The conference focused on the following key points: Launch of Special Research Report: The China Academy of Information and Communications Technology and the China Textile Industry Federation jointly initiated the compilation of the "Research Report on Artificial Intelligence Empowering the Transformation and Upgrading of the Textile Industry (2026)" to systematically review the current application status and technical paths of AI in the entire textile industry chain. Launch the action plan for breakthrough efforts: Introduce the "AI + Textile" integrated innovation breakthrough action plan, gather industrial strength, and promote the textile industry towards higher-end, intelligent, and green development. Focus on the pain points of transformation: Experts point out that current challenges include insufficient technical adaptation, prominent data barriers, high integration costs, incomplete standard systems, and a shortage of specialized talents. They also propose several practical suggestions. Note: The content and template of this article are collected from the internet and are copyrighted by the original authors. If you find any infringement, please notify us immediately and we will delete it.......

Common troubleshooting strategies for operational abnormalities of polypropylene spinning machines 2026/4/28

Polypropylene spinning machines play a crucial role in the production of chemical fibers. Mastering the correct operation procedures and maintenance methods for these machines is beneficial for the smooth operation of the production line. During the long-term operation of the Polypropylene spinning machines , some abnormal situations are inevitable. The following outlines several common problems and their troubleshooting directions, which can be referred to by on-site personnel. Abnormality 1: The frequency of breakage suddenly increases. First, check if the temperature of the spinning box is stable. Large temperature fluctuations can affect the fluidity of the melt. Secondly, check if there is any deviation in the cooling air temperature. Every 2 to 3 degrees change in air temperature will significantly alter the crystalline state of the filament. Also, check if there is any accumulation of carbonized substances on the spinneret surface. This situation usually requires immediate scraping for handling. Exception 2: The strength of the finished filament is insufficient. The following steps can be sequentially checked: whether the temperature in each zone of the screw is too high, causing a decrease in molecular weight; whether the filter sand in the spinning component is not compact enough, resulting in insufficient melt shear; whether the temperature of the heating roller has reached the set value, and whether the stretching ratio needs to be increased. Sometimes, fluctuations in the melt index of the raw materials themselves are also influencing factors. Exception 3: The silk cake is not formed properly, with protruding edges or collapsed edges. These problems are mostly related to the lateral movement mechanism of the winding head. Check if the sliding of the lateral guiding wire device is smooth, and whether the belt or gears are worn. Additionally, the pressure setting of the contact rollers also needs to be recalibrated. Excessive or insufficient pressure will affect the hardness and flatness of the silk cake's end face. Exception 4: The pressure at the outlet of the metering pump fluctuates significantly. Possible causes may include: blockage of the filter before the pump; aging of the sealing rings at the inlet and outlet of the pump resulting in internal leakage; or there is a gap in the transmission system of the pump, which requires checking the coupling and the reducer. It is suggested that after each failure is dealt with, the phenomenon, the troubleshooting process and the solution measures should be simply recorded. This will form the fault case library of this workshop, which will facilitate quick reference and handling in the future.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Oil prices soar, textile industry at crossroads: upstream producers cut output, downstream retailers stockpile goods. When will the cold upstream and hot downstream situation end? 2026/4/24

On April 20th, the international crude oil market witnessed another sharp fluctuation. Brent and WTI crude oil futures opened with a significant increase of nearly 7%, once again approaching the 100-dollar mark. The ongoing escalation of the geopolitical conflict in the Middle East, the disruption of shipping in the Strait of Hormuz, and the tightening of supply from oil-producing countries have completely dashed the market's expectations of an end to the war and a fall in oil prices. As the starting point of the textile and chemical fiber industry chain, the high and volatile price of crude oil has continuously transmitted cost pressure to the entire textile industry chain through the rigid chain of "crude oil → naphtha → PX → PTA → polyester → polyester fiber". The textile market is experiencing polarization. Due to the sluggish demand from the downstream sector, the polyester filament market has recently entered a "bearish trend". Due to the sluggish demand from the downstream sector, the polyester filament market has recently entered a "bearish trend". This round of price cuts has not effectively stimulated downstream purchases; instead, it has intensified the观望attitude of weaving enterprises. As a result of this, the operating rates of the textile industry chain have shown significant differences: The comprehensive operating rate of chemical fiber weaving in Jiangsu and Zhejiang regions has dropped to 52.72%, a significant decline compared to earlier periods, and some small-scale weaving factories have reduced production and shut down; The operation rate of the reeling process remains relatively stable, at around 75%, but it still has declined compared to the same period in previous years. The fabric dyeing factories are booming, and traders are hoarding stocks against the trend.Contrary to the sluggishness in the upstream production of polyester fibers and weaving, the market transactions of the downstream fabric and dyeing factories remain highly active, presenting a "lean season is not dull" situation. Although the current dyeing industry is facing rising costs of dyes, steam and labor, the increase in dye prices is limited, and some enterprises even have a cost imbalance, the orders are still abundant, and the factory operation rates remain at a high level. The demand for white base fabrics is strong, and the prices of base fabrics have slightly increased. The enthusiasm of traders and second-hand buyers to purchase goods has been high. In the short term, international oil prices will remain in a high-level fluctuation due to geopolitical factors. The price of polyester filament lacks the impetus for a significant rebound and is likely to continue a weak consolidation trend. Under the dual pressures of insufficient orders and unstable costs, weaving enterprises' production rates may continue to hover at a low level, and their procurement strategies will maintain the "small batch, multiple batches" demand-oriented model. In the downstream fabric and printing & dyeing market, under the dual influence of cost support and inventory demand, prices may remain stable and there is still room for local price increases. However, it is necessary to be vigilant of the risk of price correction due to the subsequent decline in demand and accumulation of inventory. Currently, the textile market is fraught with various contradictions. Enterprises should view the fluctuations in the market situation rationally. Upstream polyester factories should control their production capacity and optimize the inventory structure to avoid disorderly price cuts and competition; midstream weaving enterprises need to focus on high-quality orders, strictly control raw material and finished product inventories, and reduce operational risks; downstream traders need to purchase goods moderately and make reasonable arrangements based on their own capital and sales capabilities to prevent risks from price fluctuations in the future. Connect the world. Lead the future. In April, Shishi City witnessed a surge of trends and a burst of business opportunities. From April 18th to 20th, the 28th Taiwan-Mainland Textile and Apparel Expo and the Global Men's Clothing Supply Chain Exhibition was grandly held at the Exhibition and Art Center of Shishi Clothing City. As an influential industry event for the textile and apparel industries on both sides of the Taiwan Strait, this exhibition, with the theme of "Connecting the World Through Chains and Leading the Future", comprehensively presented the complete ecological picture of the textile and apparel industry chain, covering aspects such as fabric research and development, intelligent manufacturing, and cross-border logistics. At this grand event, the trend exhibition focusing on "Fashion and Technology Products" was particularly eye-catching. The "FabricsChina - China Textile Fabric Fashion Trends and Fashion and Technology Innovation Product Release" exhibition area, which made a splendid appearance here, not only brought together China's popular textile products and the "top ten types of textile innovation products" from renowned fiber enterprises and leading clothing brands, but also collaborated with outstanding local enterprises in Shishi to jointly create an innovative release venue that integrates technology, functionality and intelligence. The new trends in fabrics for the 2027 spring and summer season are hidden here. The tranquility and softness of "ripples", the richness and retro charm of "sediment", the vitality and freshness of "tides", the avant-garde and pioneering nature of "explosion"... As the authoritative trend release window of the Maritime Expo, the Technology & Functional Fabrics Trend Area focuses on the 2027 Spring/Summer Chinese Textile Fabric Trend as its core, presenting a panoramic display around four themes. Through the interpretation of popular colors and the display of innovative fabrics, the technological and fashionable design language is transformed into a tangible and perceptible visual experience. From 117 outstanding domestic fabric enterprises, 525 cutting-edge innovative fabrics each have their unique features. Among them, 127 fabrics are from local enterprises in Shishi. The products comprehensively cover 2027 spring and summer popular colors such as calm night gray, crimson ore red, tobacco brown, and starry deep blue. They ingeniously integrate the texture of natural fibers and core functions such as antibacterial and deodorizing, windproof and rainproof, and unidirectional moisture-wicking. With matte and simple textures, relaxed and practical structures, and restrained yet elegant designs, they vividly present the research and development achievements of technological functional fabrics, providing professional references for industry product research and design innovation. The policy for high-quality development of the light textile industry in the 15th Five-Year Plan has been announced. On the morning of April 21st, the State Council Information Office held a press conference to introduce the industrial and information technology development situation in the first quarter of 2026. According to the information disclosed at the press conference, the year-on-year growth rate of industrial output value of large-scale enterprises in the first quarter was 6.1%, and the contribution rate of industry to economic growth was nearly 40%. In related fields such as consumer goods industry, equipment manufacturing, and raw material industry, positive changes were observed. The textile industry has received multiple policy benefits in areas such as technological innovation, green transformation, and gradient cultivation. Steady progress, the "three-pronged strategy" continues to deepen Steady progress, "Three Product" strategy continues to deepen In terms of policy deployment, the Ministry of Industry and Information Technology recently issued the "Implementation Plan for Enhancing the Compatibility between Consumer Goods Supply and Demand and Further Promoting Consumption", and accelerated the promotion of standardized announcement management in key industries such as textiles. Tao Qing stated, "During the '15th Five-Year Plan' period, we will focus on doing three things: First, issue and implement policy documents for high-quality development of light textiles and other industries in the '15th Five-Year Plan', and formulate action plans for leading the optimization and upgrading of the industry through textile and light industry standards; Second, accelerate the implementation of the implementation plan for enhancing the compatibility between consumer goods supply and demand, systematically promote the construction of China's consumption brand clusters, and expand product supply in areas such as health, national trends, and elderly care; Third, deeply implement the 'Artificial Intelligence + Three Products' special action, accelerate the construction of dedicated large models and high-quality data sets in the consumer goods field, and develop new models such as flexible production, intelligent supply, and personalized customization. " Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

The application effect of hot roller heating in the production of polypropylene filament yarn (FDY) 2026/4/21

In the polypropylene spinning equipment, the heating roller is a key component, and its heating method directly affects the production stability and operating costs. The traditional heating rollers mostly adopt industrial frequency induction heating, which has two obvious drawbacks: one is that the heating ring is prone to damage, and the other is that during the heating process, it is easy to cause the temperature of the central rotating shaft of the motor to rise, thereby leading to generator failures. This problem is not uncommon in actual production and has brought additional pressure to equipment maintenance. In the production of polypropylene FDY spinning machines, the hot rollers are critical components that operate continuously. The choice of heating method not only affects product quality but also relates to the equipment's lifespan and maintenance costs. Currently, the common diameters of hot rollers are Φ160, Φ180, Φ190, Φ210, and Φ220, with a length range of 200-450mm, a rotational speed of 750-5500m/min, and the surface temperature control range for the guide wire disc is 140°C to 240°C. The surface treatment methods include hard chrome plating and ceramic plating. The traditional power frequency induction heating method has two major problems in practical application: first, the heating ring is prone to damage frequently; second, the induction heating can cause the temperature of the central rotating shaft of the motor to rise, resulting in motor damage. Both of these situations will lead to unplanned shutdowns and increase maintenance costs. After adopting the fully digital control of the electromagnetic heater, the aforementioned problems have been alleviated. This method can make the surface temperature distribution of the working area of the hot roller more uniform, meeting the temperature consistency requirements of the FDY spinning processes for industrial fibers and civilian fibers. At the same time, the heating efficiency is improved, energy consumption is reduced, and it helps to control production costs. In terms of equipment protection, the electromagnetic heater does not cause an induced heating effect on the motor shaft, ensuring the safety of the motor operation. The electromagnetic coil has a long service life and is not prone to damage, reducing the costs of spare parts replacement and manual maintenance. The system structure is simple, operating smoothly under high-temperature conditions, and can meet the requirements of different fiber FDY spinning processes. Overall, for polypropylene FDY filament production enterprises, this is a solution that achieves a balance between stability and economy.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

Focus on innovation and transformation, explore the new future of glass fiber and textile machinery 2026/4/21

On April 17, 2026, the 2026 Work Conference of the Glass Fiber and Products Industry and the 2nd Regular Meeting of the Sixth Council of the China Glass Fiber Industry Association were held in Liaocheng, Shandong Province. This conference, with the theme of "Strengthening industrial chain synergy and facilitating high-quality development", focused on the new situation of the glass fiber industry's development, technological innovation and equipment upgrading. Topics such as the domestication of spinning machinery equipment and breakthroughs in glass fiber weaving technology became the core focus. Focus on innovation and transformation, explore the new future of glass fiber and textile machineryLiu Jianhua, the Party Committee Standing Member and Vice President of the China Building Materials Federation, and the President of the China Glass Fiber Industry Association, stated that the current economic situation both at home and abroad is complex, and the operation of the building materials industry and the development of enterprises are facing significant pressure. The reconfiguration of market supply and demand, the promotion of the dual-carbon goal, and the improvement of consumption quality are forcing the industry to accelerate its transformation. As a key area of inorganic non-metallic new materials, the glass fiber and products industry should promote the transformation of the industrial system with a global perspective, expand new development paths, and strive to become a new economic growth point for the building materials industry. China is already a global leader in glass fiber production, with its production capacity accounting for a dominant position in the world. However, the industry started relatively late and has long developed in a simplistic and follower-like manner. It has overly relied on capacity expansion and cost control, and has insufficient overall technological innovation capabilities. As overseas related enterprises gradually withdraw, China's glass fiber industry must rely on its own strength to solve the problems of green, intelligent and high-end development, and carry out technological innovation based on the upgrading of downstream demands, to shape new advantages for sustainable development. Currently, the new energy vehicle industry is experiencing rapid growth, which has led to a surge in the demand for thermoplastic glass fibers. The development of high-frequency and high-speed information technologies such as AI computing power and 6G communication has further fueled the continuous heating up of the PCB, CCL and upstream electronic glass fiber markets, injecting new impetus into the industry. However, the supply of high-end electronic glass fibers is still insufficient. High-end products such as ultra-fine, low dielectric constant, low expansion glass fibers and extremely thin ultra-thin materials are difficult to meet the demands of core electronic equipment. The key bottleneck lies in the insufficient supply of high-end equipment like spinnerets. In response to this, key enterprises in the industry should enhance collaboration, form innovation consortia, and leverage mechanisms such as "challenge-proposing and awarding" to accelerate the domestication and intelligent controllability of key equipment like high-end glass fiber electronic furnaces, thereby enhancing the resilience, security level and international competitiveness of the electronic information industry chain. The China Building Materials Federation will prioritize recommending relevant projects for inclusion in the national major scientific and technological research efforts of the building materials industry, connect with the national key research and development plans, support the results in participating in industry science and technology awards, and include core research personnel in the industry expert database. In the future, the fiberglass industry will leverage technological innovation as its driving force, prioritize high-quality development, and be guided by market demands. It will leverage the role of large enterprises as the main innovators, and promote small and medium-sized enterprises to transform from component suppliers to collaborative innovation partners. It will establish an open and integrated innovation system, cultivate and expand new productive forces, and achieve a leap from basic materials to industrial key base materials, thereby supporting the high-quality transformation of the building materials industry. Gu Ping, the president of the China Textile Machinery Association, delivered a speech at an industry exchange event with the theme "With Innovation as the Pillar, Facilitating the Leap of Textile Industry". He shared information on three aspects to the glass fiber industry enterprises: viewing the textile machinery industry from the supply side, exploring the technological innovation development of textile machinery equipment from the demand side, and looking forward to the development direction and strategic path for the "15th Five-Year Plan" period. Gu Ping pointed out that from the supply side, the textile machinery industry has shifted from meeting shortages to providing high-quality supply. The transformation from traditional manual operation to intelligent operation has become an essential course. It is now transforming from single-machine intelligence to a provider of overall solution for complete equipment. At the same time, it is focusing on flexible manufacturing, the construction of fully-automated factories with no human intervention, and the research and development of green and sustainable technologies. He emphasized that in 2026, global enterprise digital transformation has entered the "digital and intelligent symbiosis" deep-water zone. Cloud deployment has become the mainstream choice in the industry, and AI-native platforms have become a necessity for enterprises. From the perspective of the demand side, the dual-circulation market provides a vast space for the textile machinery industry. The domestic textile industry accounts for more than 50% of the global market, and the demand for textile machinery equipment accounts for more than half of the global total. In terms of the overseas market, the overseas investment by textile enterprises has driven a favorable trend for the export of textile machinery. He particularly analyzed the strategic position of Xinjiang, pointing out that as a bridgehead for opening up to the west, the layout of related key projects will bring new opportunities to the textile machinery industry. At the same time, significant technological breakthroughs have been achieved in textile machinery equipment in areas such as lyocell short fibers, cotton testing, and digital printing, reaching the world-leading level. Looking forward to the "14-15" period, Gu Ping stated that the global economic growth rate is expected to be positive for China. The textile machinery industry will be guided by the "dual carbon" goal and focus on four directions: greenification, intelligence, high-endization, and integration. He emphasized that a collaborative innovation ecosystem with deep integration of "academia, industry, research, and application" should be established. Relying on platforms such as joint laboratories and national research and development centers, high-end talents should be gathered to enhance the overall competitiveness of the industry and help China's textile machinery industry achieve new breakthroughs on the global stage. Declaration: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

Raw materials are running short, no rice to cook with? Just as the regional ceasefire is in effect, crude oil prices have plummeted, and the textile industry is facing a double upheaval 2026/4/14

Entering 2026, the global textile procurement landscape is undergoing a disruptive reconfiguration - the traditional definition of "low cost" has been completely rewritten. Tariff barriers, geopolitics, supply chain stability and market access thresholds have replaced merely the artificial price as the core criteria for international brands and purchasers when choosing locations. The advantages of established procurement hubs are acceleratingly eroding, while emerging hubs are rapidly rising with the help of policy benefits and supply chain resilience. The latest ranking of the top ten global textile procurement countries for 2026 clearly outlines this transformation trajectory. Surprisingly, two markets that were once highly anticipated, Ethiopia and Indonesia, have unexpectedly dropped off the list, reflecting the deep fissure in the global textile procurement logic. 2026 Global Textile Procurement Landscape: Cost and Trade Reconfiguration Over the past decade, textile procurement has always been centered around "the lowest labor cost". Countries like Bangladesh and Cambodia, with monthly wages of around 100 yuan per person, have become the core of global contract manufacturing. But in 2026, this logic was completely overturned - the proportion of explicit labor costs continued to decline, and implicit comprehensive costs became the key factor in decision-making. The cost accounting of purchasers now covers the entire chain of raw materials, logistics, tariffs, compliance, and risk premiums. From the perspective of labor costs, the traditional advantage of low prices in the market is shrinking: Although the average monthly wage in Bangladesh remains around 140 US dollars, the minimum wage has been increasing year after year, and worker strikes and low efficiency have led to an increase in hidden costs; in Vietnam, the labor cost is approximately 328 US dollars per month, having risen by more than 80% compared to ten years ago, but due to supply chain efficiency and customs clearance convenience, the overall cost has become more competitive. More fatal is the reliance on raw materials - 90% of the fabric and accessory materials in Bangladesh and Cambodia are imported. Coupled with the Red Sea crisis, which has caused shipping costs to soar by three times and shipping cycles to extend by 20-30 days, the combination of "low labor costs + high logistics costs + raw material premiums" completely offsets the labor advantage. Meanwhile, tariffs have become a significant variable in terms of cost. The United States imposed a punitive tariff of 36% on certain textile and clothing categories, while the EU implemented the carbon border tax and the digital passport for textiles. These measures have led to a sharp increase in export costs. Countries like China and Vietnam, which enjoy tariff reductions under free trade agreements, while India and Pakistan, which are facing high tariffs due to trade disputes, have seen a further widening of the cost gap. Additionally, the conflict in the Middle East led to the "Hormuz shock", with the supply of chemical fiber raw materials (MEG, PTA) being disrupted and prices soaring. This has put pressure on the procurement costs of countries that rely heavily on Middle Eastern raw materials, completely reversing their overall cost advantages. Will the drop in crude oil prices open up an opportunity for textile enterprises to replenish their inventories? The window of opportunity has arrived. On the early morning of April 8th local time, the Supreme National Security Council of Iran officially issued a statement. Following the advice of the Supreme Leader and with the approval of the council, it decided to accept the ceasefire proposal put forward by Pakistan. Almost simultaneously, Iranian Foreign Minister Ali Akbar Salehi announced that the Strait of Hormuz would be open for safe navigation within the next two weeks. Meanwhile, the US side also sent out signals of compromise. President Trump of the US expressed through social media that he had received the relevant suggestions proposed by Iran and agreed to suspend the bombing attacks against Iran for two weeks. This series of intensive statements instantly changed the tense situation in the Middle East's geopolitics and injected a "calming agent" into the global energy market that had been shaken for several days. It is worth noting that French President Macron said on the same day that about 15 countries were coordinating to reopen the Strait of Hormuz to facilitate the resumption of navigation. The energy market reversal offers textile enterprises a breathing space. The announcement of the ceasefire promptly triggered a sharp market reversal. On April 8th, the price of May-delivery light crude oil futures on the New York Mercantile Exchange dropped by as much as 19.4% at one point, reaching a low of $91.03 per barrel. The price of Brent crude oil futures in London also fell by 16%, reaching $91.7 per barrel. Although there was a slight rebound later, it remained in a range of around $95 per barrel. The cooling of the energy market directly affected the downstream industries. The price of PTA futures dropped sharply, falling below 6,400 points, ending the previous continuous upward trend, and giving textile enterprises, which had been troubled by raw material price hikes, a breathing space. However, most of the thousands of ships (including 187 oil tankers) stranded in the Hormuz Strait on that day were still in a state of waiting and observing, and only a few ships passed through smoothly. The global major container shipping group Maersk also clearly stated that it would not resume the previously suspended routes in the Hormuz Strait, highlighting the cautious attitude of the market towards navigation safety. The behind-the-scenes power struggles and the current situation still remain uncertain. However, whether this sudden ceasefire and peace talks represent the dawn of peace or merely a strategic delay tactic by both sides remains to be carefully observed. Judging from the statements made by both sides, the differences remain significant: Iran's core demands cover the permanent cessation of war, the end of regional conflicts, the formulation of a security passage agreement for the Strait of Hormuz, post-war reconstruction, and the lifting of sanctions, etc. These provisions almost touch upon the core interests of the United States and Israel. Even if the US indicates its acceptance of the suggestions, it is difficult for them to fully accept them. Even choosing to compromise selectively poses considerable difficulties. What is more noteworthy is that the Strait of Hormuz, as an important strategic asset in Iran's hands, even if it promises safe passage within two weeks, is likely to adopt a cautious attitude - the Islamic Revolutionary Guard Corps of Iran has published a safety passage map, warning ships to avoid the main channel where anti-ship mines may exist and to follow the designated alternative route. This shows that they have not completely relaxed control and are still on guard against a sudden attack by the US military. Textile enterprises are experiencing a rare window of opportunity for replenishing their inventories. Although the long-term trend of the situation in the Middle East remains uncertain, in the short term, the significant drop in crude oil prices is undoubtedly a timely relief for textile enterprises that are deeply troubled by raw material shortages. Previously, driven by the continuous rise in crude oil prices, the prices of textile raw materials such as polyester fibers had been rising steadily. Many small and medium-sized textile enterprises were in a desperate situation due to running out of raw material inventory and were unable to start production because of the excessively high raw material costs. Even if they had orders, they could not start work due to the inability to bear the high costs. However, the cooling of oil prices brought about by the ceasefire between the United States and Iran, combined with the decline in the price of PTA futures, has precisely provided a rare window period for textile enterprises to replenish their inventories. In line with the inventory management principles of the textile industry, replenishing stocks moderately at this time can not only alleviate the short-term shortage of raw materials but also reduce procurement costs by taking advantage of the price decline, providing a guarantee for subsequent production.Disclaimer: The content and templates in this article are compiled from the internet. Copyright belongs to the original author. Please inform us immediately if there is any infringement, and we will contact you for deletion.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The 2026 Liusha Chamber of Commerce Textile and Clothing Industry Intelligent Manufacturing Innovation Summit was held in Pu Ning City. 2026/4/14

Spring tides surge to start a new journey, intelligent manufacturing empowers the future. On the afternoon of April 10th, the "Innovation-driven Intelligent Manufacturing for the Future" - 2026 Pu Ning City Liusha Chamber of Commerce Textile and Clothing Industry Intelligent Innovation Summit was held at the Pu Ning International Commodities City Convention Center. Liang Zhubao, a member of the Jieyang Municipal Committee and the Secretary of Pu'ning City, Zhang Haiyan, the Deputy Director and Secretary-General of the Cluster Work Committee of the China Textile Industry Federation and the Vice President of the China Textile Industry Enterprise Management Association, Peng Guifu, the Vice President of the China Promoting Association for International Cooperation and Development of Private Enterprises, Chen Tongxuan, the Executive President of the Provincial Textile Association, Huang Yingzhong, the Party Secretary of the Textile Science and Engineering College of Wuyi University, and Wu Shulin, the Vice Mayor of our city, among other leaders and guests, attended the meeting. Liang Zhuohua delivered a speech at the meeting. He pointed out that the textile and garment industry in Pu Ning has a wide range of products, a long supply chain, strong resilience and a promising future, and thus has broad development space and potential. He emphasized that one should firmly hold onto the confidence for development, follow the path of brand building, strengthen the regional brand of "Pu Ning Clothing", and continuously enhance the core competitiveness and industry influence of the Pu Ning textile and garment industry. We should accelerate transformation and upgrading, promote the establishment of the Pu Ning Textile and Garment Innovation Technology Center and the Product Selection Center, support enterprises in developing ODM models, build a scientific and technological innovation platform for enterprises, embrace the new AI development path, and promote the transformation and upgrading of the Pu Ning textile and garment industrial cluster towards intelligence and high-endization. We should strictly control the quality standards, adhere to the core principle of quality as the foundation, and persist in exerting efforts in both improving product quality and expanding the market, continuously deepen the cooperation among universities, enterprises and government through research, production, application and use, and guide enterprises, government and universities to work together, shoulder shoulders and heart to heart, to jointly create a new future for Pu Ning Clothing. Zhang Haiyan stated in her speech that she hopes the Pu Ning textile and clothing industry can further leverage its production factors, resource endowments and organizational innovation advantages, and continuously enhance its development based on the current industry foundation. The industry association will, as always, provide practical services to support the development of the Pu Ning textile and clothing industry, and looks forward to everyone jointly contributing more efforts to the high-quality development of the textile cluster. The conference invited Vice Dean Wu Yingzhu from the Textile Science and Engineering College of Wuyi University to give a special lecture for the conference, providing everyone with cutting-edge, professional and practical insightful sharing. The lecture covered both macro industry trends and micro implementation paths, offering clear ideas and professional technical guidance for the intelligent upgrading of textile and garment enterprises in Puning. Disclaimer: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us immediately and we will delete it.......

The application, performance advantages and operation management of polyester industrial filament spinning and drawing combined machines 2026/4/14

With the gradual increase in the demand for industrial textiles, the market application scope of polyester industrial filament spinning and drawing combined machines has continued to expand, and the equipment performance and optimization direction have also been constantly adapting to the actual needs of the industry. The application of polyester industrial filament spinning and drawing combined machines covers multiple industrial sectors. The high-quality polyester industrial filaments produced by these machines, with their excellent performance, have become indispensable basic materials for many industries, facilitating the upgrading of various fields. In terms of quality control, the precise temperature control and drawing design of the equipment ensure that the key indicators such as the strength, elongation at break, and thermal shrinkage rate of the industrial yarn fluctuate minimally, resulting in high product consistency. The combined effect of the slow cooling device and the side blowing air system ensures uniform yarn fineness, low occurrence of stray fibers and broken fibers, and strong adaptability for subsequent processing. The equipment can produce high-strength and low-shrinkage yarns, meeting the requirements of high-end applications such as automotive safety belts, rubber frameworks, and geotextiles, helping the enterprise expand its product market. In terms of energy consumption and operating cost control, the equipment design is reasonable. The heat roller uniform temperature technology and the energy-saving type spinning box design effectively reduce heat energy loss. The domestic fully automatic winding and intelligent control system can reduce manual intervention, lower operational intensity, and the maintenance cost can be controlled in the long term. From production to operation and maintenance, the entire set of equipment can help enterprises optimize the cost structure, stabilize the output of high-quality industrial yarn, and enhance the market adaptability. During the production process, operators need to monitor parameters such as temperature, pressure, and stretch ratio in real time. Any slight fluctuations can affect the quality of the finished filament. Regularly cleaning the fine holes of the spinneret and replacing the filter element of the melt filter can effectively prevent problems such as broken filaments and fuzzy filaments. The filter screen of the side-blowing air system needs to be cleaned on time to ensure uniform air velocity and consistent cooling effect of the filament. In terms of daily operation and maintenance, it is necessary to regularly add lubricating oil to the rotating parts of the equipment, check the stability of the circuit and control system connections, and promptly identify potential faults. After the machine is shut down, the screws, spinning boxes, etc. should be cleaned to avoid the solidification of residual melt affecting the next startup. Standardized practical operation and maintenance procedures can enable the spinning and drawing combined machine to maintain stable output for a long time, while reducing the equipment failure rate and providing a guarantee for the smooth operation of production.Changzhou Fubon Chemical Fiber Machinery Factory Technical production: Polypropylene spinning machine, polypropylene FDY spinning machine, polypropylene FDY equipment, polyester POY spinning machine, polyester POY production line, polyester POY equipment, polyester POY machinery, polyester recycled bottle FDY spinning machine, polyester FDY spinning machine, polyester FDY machinery, Spandex spinning machine, spinning special parts, polyester small Experimental machine, polypropylene small experimental machine, nylon small experimental machine.Changzhou Fubon Chemical Fiber Machinery Factory Technical  is a research and development and production of all kinds of chemical fiber machinery as the main professional manufacturing suppliers, research, development, production and sales as one, in order to meet the market demand, our factory has established a perfect chemical fiber spinning experimental base, to provide customers with good equipment and technical services. We mainly provide customers with complete sets of polyester, polypropylene, nylon, spandex and other chemical fiber complete sets of equipment, and undertake a variety of related equipment renovation projects and customized services.......

The green barriers in textile trade continue to escalate. 2026/4/8

Recently, the European Union and the United Kingdom have successively introduced significant environmental protection regulations in the textile and clothing sector. Two "green barriers" have been tightened simultaneously, directly impacting the survival and development of China's textile export enterprises. The EU's ban on destroying unsold textiles and the UK's implementation of the Extended Producer Responsibility (EPR) plan mark the entry of environmental protection supervision in the European and American markets into a new stage. Enterprises can only quickly adapt to the regulatory requirements to safeguard their overseas market share. EU ban on destruction, UK EPR, dual regulation is coming The two policies have their own focuses, but both revolve around "green environmental protection and full life-cycle responsibility", and set clear compliance requirements for export enterprises. The European Union relies on the "Sustainable Product Eco-design Regulation" (ESPR), completely prohibiting enterprises from randomly destroying unsold clothing, accessories, and footwear products. Large enterprises must implement this from July 2026, medium-sized enterprises have a transitional period until 2030, and small enterprises are temporarily exempted. At the same time, enterprises are required to record the disposal of inventory details and report them on time, completely eradicating the industry's stubborn problem of "destroying unsold products". The UK has launched a textile EPR program, requiring brands, importers, etc. to bear the responsibility for the recycling and processing of products throughout their entire life cycle. The fees are charged based on product units rather than weight, and are linked to the durability and recyclability of the products. The policy covers mainstream textiles such as clothing and shoes. Although small and medium-sized enterprises have a one-year grace period, they do not have the right to a fee exemption, and the export cost will significantly increase. Textile export enterprises are facing three major challenges. After the new policy was implemented, the operational pressure of China's textile export enterprises has significantly increased, with the core pain points concentrated in three aspects. First, the disposal of inventory is restricted. The previous model of reducing storage and maintaining brand image by destroying unsold products no longer works. The costs for reselling, refurbishing, and donating unsold products have increased, and the asset impairment risk of inventory accumulation has risen. Second, the export costs have structurally increased. The EPR fees in the UK, compliance declaration costs, and product green transformation costs have further weakened the price advantage of China's textiles. Third, the compliance threshold has risen. The EU requires full-chain data traceability, and the UK requires products to conform to green standards. Small and medium-sized enterprises lacking digital management capabilities find it difficult to adapt. Note: The content and template of this article are collected from the internet and are copyrighted by the original authors. If there is any infringement, please notify us promptly and we will delete it.......