Cultivating excellent teams must master the trick! 2021/4/30

A company wants to get better development, people are main productivity, but not alone can achieve the development of the company, but to rely on the entire team, unite all power, can realize the great ideal ambition of the company. Therefore, the management team is the first step in the key development key, then today we talk about how to manage team management?Administrator's requestPart 1Learn to listenFirst of all, you must manage yourself. To become an excellent team manager, you will learn to listen, learn to listen, and make an example. Most of the people are so proud, think that they are quite "powerful", so most people don't like leaders or The so-called education of colleagues. Therefore, manage the team, managers should improve their work skills, set an example, let the team members think that you are amazing, and your hands-seeking guidance and help, this is more effective than your own active management team.Part 2Learn from provinceThere is always a team leader complaining that the team's members do not perform. In fact, a further problem is that if the leadership of the team leader can't lead, what is the face of the face? As a leader, if you are unfair, the member must have a unusual person; as a leader, if you use people, the team will have more things to be delayed; as a leader, if you treat people, if you are not honest, the team is There must be more than the fraud; as a leader, if you are unknown, the whole team will have more people who are in vain ... so all, the efficient team building is taboo. "University" is said: Since heaven, the one is in the same way, all of them are subject to this. As a team leader, it is not allowed to be responsible for it.Part 3Pay attentionAlthough many employers have fallen in history, the suspects don't have to have a leadership, but now have an extraordinary merit, now the social life is too big, and 99% are living for others, or for living, work, work Just a living means! The rest of the 1% is ideal, and people who are ideally alive will become excellent people, and those who have been properly becomes excellence! These people are in your team, the blessings of your team! Because these people will be your team's engine, these people don't need you to intervene, the more you intervene, the more you feel.But people who are often alive, and the cost of his use will also become very high. You are limited to the management of the team and the company, if the team or company is limited, you are It is very limited in use. After all, people go to the heights, water is low!Under the premise of the team and the company's operating conditions, you still have to use ordinary people, these people need you to give him the throttle every day, the throttle is not moving, and the throttle has more statement.Therefore, in the ordinary team and enterprise, the target cannot wait for the results, if the result is there, it will definitely be that you as a team administrator did not reach the goal, there is a situation where the goal is not reached, you say anyone again It is useless because you have delayed the time, delayed money, and the executivers will bear such a big consequences must be you unqualified. Set the goal of the team, be sure to have a job in the management process, so that everyone's people will grow with you and share the benefits of growth!Requirements for the teamPart 1Team normEach team should have its own team specifications. Different from the management system of the company, team norms in team building more inclined to a common soul contract for team members. Once the agreement, before being corrected or abandoned, it is necessary to strictly follow. Handling the team's individual rear molecules, and is also agreed by most team members.There is no team specification, I will not talk about the team building. A manager must be cautious, so I solemnly look at the construction and update of team specifications. In this process, gradually feel the effects of "law" and "law", enhance self, improve team building results.Part 2TargetThe leader is not a person who decides how to climb the ladder. He decided that the ladder is on which wall of the ladder, the direction of the leaders must be clear. The correct method and reasonable target setting is a key target for success. The target must: specifically, it can be measured, the target has certain correlation, and the explicit deadline. The team's driving force is actually a goal for the team, giving a goal for each member of the team, people struggling to enhance the team spirit for a common goal, because they must rely on others, but also ready to rely on others. With such a goal, the project team can have powerful attractions to team members, thereby enhancing the team's cohesiveness, and the driving force can make the organizational goal with the team's target, so it can make the team's productivity is greatly improved.Part 3Team learning abilityExercise team learning ability, we must constantly give team members to education, training. We have seen that the establishment of an efficiently operated team must stand on the platform of establishing a learning organization, consider whether the team has a learning attitude and deep practical experience and the theory that is associated with it. Knowledge. If your organization, your team deviates from this direction of the learning platform, we must examine this organization, where is the cause of this team? Can it lead this team to achieve performance growth. These issues require managers to have a comprehensive physical examination of your organization. The problems and bottlenecks we face are how to establish an efficient learning team, how to use your cultural ideas, use your standardized action and your intention to manage your team.THE ENDDisclaimer: This article is sorted out from the network, copyright belongs to the original author;        If there is any infringement, please inform us that after verification.......

China Sea Promotion Association helps Keqiao textile enterprises to expand overseas 2021/4/23

Yesterday at 2 o’clock in the afternoon, the Silk Road Keqiao·Milan Pavilion Cooperation and Exchange Meeting-The Italian special was held in the living room 8 of Oriental Milan International Fashion Publishing Center. Qian Miaodi, Deputy Director of China Textile City Construction Management Committee, Keqiao Textile City, Shaoxing City The Executive Chairman of the Overseas Market Promotion Association (hereinafter referred to as the China Overseas Promotion Association) Wei Changjun, Secretary-General Han Jun, Vice Chairman of the Italian Branch Zhao Liming, and many members of the Promotion Association participated in the event. It is reported that the exchange meeting was co-hosted by Zhejiang Xingchuan Culture Media Co., Ltd. and the Hai Promotion Association.Secretary-General Han Jun presided over the exchange activities, expressed his gratitude to everyone for coming, and focused on a few issues that foreign trade people are more concerned about, and concentrated and unified the preaching guest-the vice chairman of the Italian branch Zhao Liming (hereinafter referred to as the chairman Zhao). Consultation.Chairman Zhao said that currently Italy, as a European textile fashion gathering place, has significant advantages: First, it has a complete set of accessories, from clothing design, post-dyeing and finishing, garment processing to accessories and accessories. There are more than 2,000 Chinese garment factories in Prado alone, each with an average daily shipment of 2,000-3,000 pieces; the second is the vast market, radiating Turkey, France, Spain, Germany, etc., with good development prospects; the third is the concentration of industries. Clothing production and sales are mainly concentrated in the Prado area, which can achieve 10,000 orders and three-day shipment speed, which is very important for fast fashion brands.Lin Jinsong, the person in charge of Shaoxing Huacai Textile Co., Ltd., consulted Chairman Zhao on the issue of payment. In recent years, Rota Textile has exported lace fabrics to Italy through intermediaries, but the specific foreign trade process is still unclear. In view of the situation that individual payment collections have caused the supplier's bank card to be blocked, Chairman Zhao suggested paying attention to the countries where the payment is made. At present, European and American countries are relatively normal. Some countries and regions with little trade with China should pay more attention. As far as possible, customers choose to cooperate with good brands.When talking about the impact of the epidemic on Italian textiles, Chairman Zhao told reporters that the impact of the epidemic is still very obvious. In particular, Italy is the hardest-hit area, and retail stores are basically closed. In addition, Germany, France, Spain and other neighboring countries are also operating. Dismal, the garment factories that care about can only produce a small amount or even stagnate production. However, there are not many factories and brands that have closed down due to the epidemic. In addition, on April 6, Italy began to gradually loosen the control of the epidemic, and it should slowly return to normal.The new crown epidemic and the large-scale blockade of the global economy have promoted the development of foreign trade e-commerce. At present, the National Development and Reform Commission and other 28 departments have jointly issued the "Implementation Plan for Accelerating the Cultivation of New Consumption", which is intended to promote "Silk Road E-commerce", strengthen bilateral e-commerce cooperation mechanism construction, promote the docking and cooperation of e-commerce enterprises, and promote B2B direct export and export. Overseas warehouses enjoy the convenience of cross-border e-commerce customs clearance.Regarding the fabrics currently circulating in the Italian market, Chairman Zhao said that most of them come from Keqiao Textile City. The reasons are as follows: First, as an international textile fabric production and distribution center, China Textile City has sufficient stocks and strong weaving capabilities. It meets most of the fabric needs in Italy; secondly, Keqiao's fabrics have advantages in industrial scale and high cost performance; thirdly, there are many foreign trade companies in Keqiao, and the fabric styles follow the international trend and care about good sales.Chairman Zhao has a preliminary plan for the future cooperation and development of Keqiao and Italy. Currently, he is discussing with Zhou Xiaoyan, the chairman of the Italian branch, and will promote it from two perspectives. Firstly, introduce advanced Italian textile technology, reform Keqiao's supply side, improve the quality of Keqiao fabrics, and break the bottleneck of Keqiao's high-end fabrics in Italy. Secondly, by creating a new "Keqiao Milan Pavilion" in Prado, the technology is improved. The used fabrics are visually displayed to Italian buyers to expand sales channels.　Through this exchange, the guests present have benefited a lot. Andy of Shaoxing fobric town Ltd said that there are currently not many Italian customers of the company, and many problems have not been encountered. However, through this exchange, the company has made preparations for further development of the Italian market, avoided many risks, and provided new ones. Ideas. Lin Jinsong of Huacai Textile told reporters that through face-to-face communication with Chairman Zhao, he has gained a better understanding of the Italian market and has a better understanding of overseas customer groups. He will come to participate in more events like this in the future.At the end of the event, a licensing ceremony was held. On behalf of the association, Executive Chairman Wei Changjun awarded the certificate of Vice Chairman of the Italian Branch of Zhao Liming Overseas Promotion Association. President Wei said that Italy is the gateway to Europe, and it is also one of the few countries in Europe with a complete textile industry chain. The addition of President Zhao made us an old lady in Italy for the Keqiao cloth merchant.......

What are the components of the polypropylene spinning machine? 2021/4/23

The polypropylene spinning machine is mainly used for spinning 100-2000 denier polypropylene filaments, and the product is fully oriented drawn yarn (FDY). The raw material is polypropylene fiber slices.Polypropylene fiber is mainly used in: curtain cloth, sofa cloth and other office furniture cloth, as well as luggage belts, Simmons edging belts, ropes and other fields.The main components of polypropylene spinning machine:1. Automatic feeding machine2. Masterbatch injection machine3. Screw extruder4. Pre-filter (selected by the user)5. Spinning box and components6. Metering pump and transmission7. Side blower and tunnel8. Drafting hot roll9. Winding frame and oil nozzle (tanker) oiling device10. Network device11. Fully automatic winding machine12. Electric control system: including screw pressure control cabinet, spinning box temperature control cabinet, draft temperature control cabinet, draft frequency conversion cabinet, winding frequency conversion cabinet and conventional electrical control systems.Main features of polypropylene spinning machine:1. Polypropylene spinning machine can be used in the field of renewable materials2. The polypropylene spinning machine can be heated by high-frequency heating rollers, with low energy consumption and uniform heating roller temperature3. The side blowing wind speed is uniform and stable4. The  polypropylene spinning machine runs stably, has a low failure rate, and is simple and convenient to operate and maintain......

About import yarn quotes 2021/4/16

Recently, the import yarn is overall, and the local is slightly decline. According to Feedress in Shandong Qingdao, the current Indian yarn offer continued to fall from 200-300 yuan / ton, but the transaction is still not ideal.Market analysis, recent market or steady, reasons:First, the overall domestic market is weak, and the domestic yarn is still not ideal. To go to the stock, some manufacturers sell low-cost sales, dragging the imported yarn. For example, due to the 16th, Shandong, Henan and other places have nearly 24,00 yuan / ton, and the comb comb is 28,100 yuan / ton. Domestic yarns continue to fall than in the beginning of this month, especially after subsequent finished stocks, the psychology of manufacturers' low price promotions is more strong.Second, the recent imported gauze is chaotic, and the high-grade yarn is difficult, and there is a strong pessimistic atmosphere. According to market feedback, the current Jiangsu, Zhejiang and Shandong Market Vietnamese yarn gauze 21S woven quality price is nearly 15800 yuan / ton, the implementation of orders, slow goods; Indian yarn C21S price is 21700-21900 yuan // ton, take the goods The situation is poor.The third is that the exterior price is stable. The price of the squid of the squid is stable; the yarn is the second-line head brand of the gauze, the C12S is $ 495 / piece, equivalent to RMB 20600 / ton, May ship period, 90 days of letter of credit. The printing exterior is overall, and the yarn C16S waten is drifted 2.8-2.85 US dollars / kg attachment, equivalent to RMB 21900-22300 yuan / ton, May ship period, 90 days of letter of credit; Yarn Factory Brand OEC10S report 2.00 US dollar / kg attachment, equivalent to RMB 15800 / ton, May ship period, 90 days letter of credit. Yue yarn price is stable, the gauze is in the middle and lower quality OEC21S reported 1.99 US dollars / kg, equivalent to RMB 15200 / ton, May boat, miking letter of credit.In summary, the market is expected to enter the yarn market or continue to fall steadily.......

Improvement of polypropylene spinning machine 2021/4/16

There is a new industry in electromagnetic heating energy-saving modification that can use electromagnetic heaters, which is the textile machinery industry. This industry has a  polypropylene spinning machine, polypropylene spinning machine has different types: polypropylene FDY spinning machine, polypropylene FDY Spinning machine, polypropylene POY spinning machine, polyester FDY spinning machine, polyester FDY spinning machine, polyester Poy spinning machine, polypropylene BCF spinning machine has one of the most important components called hot rollers, it needs to be heated to a certain temperature, And it is running at high speed.The size of the hot roller is different, and generally there is a diameter φ160 φ180 φ190 φ210 φ220. Thermal roller length: 200-450mm, the speed range is: 750-5500m / min, the surface temperature of the guide wire: ≤ 240 ° C-140 ° C, the surface of the hot roller is treated: colloidal chromium, ceramic.The hot roller now heating is a power frequency induction heating. Its disadvantage is that the heat generator is easily damaged. The most terrible is to easily heat the center shaft shaft of the motor to burn the motor. The newly developed all-digital applies to the polypropylene textile heat roller heating efficient energy saving, completely solves the shortcomings of traditional heating, and greatly reduces the cost to customers. The main advantages after the heat roller is changed to the electromagnetic heater:1. The surface temperature of the heat roller workspace is uniform, which can meet the requirements of different industrial silk, civilian wire FDY spinning process2. The surface temperature of the heat roller workspace is rapid, the energy saving is obvious, and the efficiency is greatly improved.3. After using the electromagnetic heater, the rotating shaft of the hot roller motor does not damage the motor due to induction heating.4. The coil of the electromagnetic heater will not be damaged, reducing maintenance and cost5. The equipment system is perfect, the structure is simple, and it is easy to run smoothly and reliable at high temperatures.......

How much do you know about polypropylene FDY spinning machine? 2021/4/9

There is a new industry in electromagnetic heating energy-saving, which can use the electromagnetic heater. It is a textile machinery industry. This industry has a polypropylene spinning machine, which has different types: polypropylene FDY spinning machine, polypropylene Poy spinning machine , Polyester FDY spinning machine, polyester POY spinning machine, polypropylene BCF spinning machine. This machine has one of the most important components called a hot roller, which requires heating to a certain temperature and is running at high speed. The size of the hot roller is different, and generally there is a diameter φ160 φ180 φ190 φ210 φ220. Thermal roller length: 200-450mm, the speed range is: 750-5500m / min, the surface temperature of the guide wire: ≤ 240 ° C-140 ° C, the surface of the hot roller is treated: colloidal chromium, ceramic. The hot roller now heating is a power frequency induction heating. Its disadvantage is that the heat generator is easily damaged. The most terrible is to easily heat the center shaft shaft of the motor to burn the motor. Shenzhen Xinhuiyuan new developed all-digital applied to the polypropylene textile mechanism heat roller heating and efficient energy saving, completely solved the shortcomings of traditional heating, greatly reduced costs for customers. The main advantages of the heat roller change the source of the source electromagnetic heater are:1. The surface temperature of the thermal roller workspace is uniform, which can meet the requirements of different industrial silk, and the civilian wire FDY spinning process. The surface temperature of the thermal roller workspace is rapid, and the energy saving is obvious, and the efficiency is greatly improved. After using the electromagnetic heater, the axle of the heat roller motor does not damage the motor 4 due to the induction heating. The coil of the electromagnetic heater will not be damaged, reducing maintenance and cost 5. The equipment system is perfect, the structure is simple, and it is easy to run smoothly and reliable at high temperatures.......

Non-Woven Industry Green Development Innovation Alliance Council's first expansion meeting Shanghai held 2021/4/9

On March 31, the Green Development Innovation Alliance (Nonwoven Green League) Council, the Green Development Innovation Union (Nonwoven) Council, the first expansion of the Conference of China, Vice President of China, Li Ling Shen, Middle School Association Li Gui Mei, Non-Wi-Government Secretary, Secretary-General, Director of the Nonwoven Government, Liu Tao, vice president of Saidi Group, etc.    Director Liu Tao first notified the non-woven green army 2021 overall work plan, pointed out that the relevant topics such as carbon peaks and green sustainable development have become the focus of future development and industry concerns. In the context of green development, the nonwoven green alliance shoulders More social responsibility, more streamlined non-woven green alliance: the purpose of green development, exploring the new model, new path of the nonwoven industry green innovation development, new path, promoting the transformation of industries and upgrading, and creates industrial green innovation and development ecology.The nonwoven Ground Secretariat reported non-woven green alliance duties and status quo. In the 2021 work plan, informing the non-woven green alliance propaganda program, new member units, vote, to become non-woven The new vice chairman unit, which focuses on the work plan and implementation path of the green sustainable development of nonwoven industries, China International Industrial Textiles and Non-Weaving Exhibition (CINTE 2021), non-woven green alliance display programs, etc. .Li Liling said that in recent years, in recent years, the nonwoven industry has grown rapidly, especially in 2020, non-woven fabric capacity reached 8.788 million tons, an increase of 31.85%, industry growth and progress provide foundation for green development, green Development will also become the rigid requirements and important driving force of high quality development in the industry. President Li pointed out that the industrial green development responsibility is significant, the mission is glorious, and the green development of the industry has gradually improved the cost concerns to the corporate brand, the image and the value of the value. The demand for green development is gradually subjected to a single hygiene product to geotechnical and architecture and other comprehensive green development. Expand; the industry's green development is gradually transforming the industry's business behavior to the industry, green economic management, which provides an opportunity for industry green sustainable development, and green development will become an important force for industrial value reconstruction.The representatives of the meeting also spoke, and at the same time as the early work of the nonwoven greece, they actively planned to make a planning for the construction of the industry green development and non-woven green alliance, and made many comments and suggestions for the non-woven green alliance.......

Kazakhstan plans to export 10,000 tons of wool to China 2021/3/19

Yerkebulan Akhmetov, Director of the Animal Production and Processing Department of the Ministry of Agriculture of Kazakhstan (abbreviated as Kazakhstan), revealed that the country plans to export about 10,000 tons of wool to China in 2021, accounting for about 30% of the country’s annual output. The Ministry of Chemical Industry also announced that the government is planning to reduce export tax rates to help export wool. The relevant draft laws have been published on the portal website.　　 5,000 tons of "test water" failed? Harbin wool won the "admission ticket" for the Chinese market!　　Because my country is an important wool importer in the world, Kazakhstan has always hoped to enter the Chinese wool market. Previously, it had exported 5,000 tons of wool to my country to "test the water", but it was later suspended due to lack of inspection and quarantine certificates. It was not until September 2019 that China and Kazakhstan formally signed the protocol on the inspection and quarantine requirements for wool exports to China, that Kazakh wool was officially awarded the "entry ticket" to the Chinese market.　　 With the increase in exports of Kazakhstan’s agricultural products to China, the trade relations between China and Kazakhstan have become closer. According to data released by relevant departments, the bilateral trade volume between China and Kazakhstan reached 21.43 billion U.S. dollars (approximately RMB 139.3 billion) in 2020, and China continued to maintain its status as Kazakhstan’s second largest trading partner; on February 5, representatives of the two countries officially Exchange opinions on issues such as "expanding China-Kazakhstan trade and investment cooperation" in order to reach a consensus.　　75% wool is exported to China! Australia's "profitable business" will be robbed?Returning to the increase in exports of Kazakh wool to China, due to the huge amount of wool imported by China each year, major wool producing countries in the world such as Australia, New Zealand, Uruguay, etc. regard this market as a “contested place”, and Australian wool takes up the largest share. The market share is the highest.　　 Public information shows that Australia’s wool exports account for up to 40% of the world’s total. More than 98% of the wool produced in this country is exported, and 75% of them are sold to the Chinese market. It can be said that Australian wool is extremely dependent on the Chinese market. If the Chinese market is lost, the country will face huge economic losses.　　 Although Australia’s wool export quota to China will increase by 5% in 2021, as Chinese buyers are less and less interested in various products in Australia, Australian wool traders are also beginning to worry whether Chinese buyers will “abandon” wool?　　 What worries Australian businessmen even more is that if Chinese buyers no longer choose Australian wool, wool from New Zealand and other countries will quickly seize the lost market in Australia. It is reported that in January this year, China and Singapore re-signed an agreement to upgrade the China-Singapore Free Trade Agreement. For Kazakhstan, this is also a good opportunity to expand wool exports to China.......

Pulled by the global rally! Russia's PP price hits a record high in the beginning of 2021 2021/3/5

The ICIS-MRC price report shows that due to the shortage of raw materials, the price of PP in Russia has hit a record high.In previous years, due to weak demand and oversupply, PP prices in the Russian market tended to become cheaper in January and February. However, this year's situation has changed dramatically because high prices in foreign markets have exerted upward pressure.The price of propylene homopolymer (PP homopolymer) began to rise in January, and the price increase intensified in February. Since the beginning of the year, prices have increased by more than 17%.In late February, due to the extreme cold weather, many US manufacturers halted production unplanned, and the shortage of PP in the global market intensified.The shortage of PP in Europe caused prices to rise by 15% in February.Since the beginning of the year, the rapid rise of PP prices in many parts of the world has also prompted the largest producers to continuously increase prices in the Russian market.Export prices of Russian producers to some destinations have long been higher than domestic prices.Cheap PP imported from Turkmenistan has decreased. In the past export trade, the price increased to US$1515/ton FCA/FOB, while the export price in early December averaged US$1050/ton FCA/FOB.In February, the supply of PP in the Russian market was tight, and some processors were unable to fully meet their polymer demand, even at record high prices. The polymer supply situation is unlikely to improve in March.Some sellers’ spot quotations for PP homopolymers exceeded 130,000 rubles/ton CPT Moscow (tax included) in late February, while at the beginning of January, the price of this grade did not exceed 104,500 rubles/ton CPT Moscow (tax included) .......

The basic parameters of polypropylene high-strength FDY spinning equipment 2021/3/5

Polypropylene high-strength FDY spinning combined drafting machine: This equipment is mainly used to produce 150D～1400D, fine, medium and coarse denier high-strength polypropylene FDY drafting yarn.Filament uses: safety belts, safety nets, conveyor belts, industrial sewing threads, fire hoses, hoisting belts, etc.Equipment features: 1. Low energy consumption. 2. The equipment runs stably, with low failure rate and high output. 3. Convenient operation and maintenanceStrength range: 7.0g/d7.5g/dDevice model: RH-G4, RH-G6, RH-G8, RH-G12Polypropylene high-strength FDY spinning equipment:Polypropylene high-strength FDY spinning equipment is mainly used to spin 150D～1400 denier high-strength polypropylene filaments, and the product is fully oriented drawn yarn (FDY). The monofilament strength can reach above 7.0g/D. The raw material is polypropylene fiber slices.Polypropylene high-strength yarns are mainly used in: industrial sewing threads, slings, geotextiles, ship ropes, conveyor belts, fire hoses, safety and protective belt nets and other fields. Basic parameters of polypropylene high-strength FDY spinning equipment: Finished fineness: 150D～1400 (denier) Mechanical speed (large): 3000m/min Process speed (large): 1600m/min～ 2200m/minNumber of tows per part: 4, 6, 8 Number of drafting zones: 4 zonesThe main components of polypropylene high-strength FDY spinning equipment:1. Automatic feeding machine2. Masterbatch injection machine3. Screw extruder4. Pre-filter (selected by the user)5. Spinning box and components6. Metering pump and transmission7. Side blower, refrigeration unit and tunnel8. Drafting hot roll9. Winding frame and oil tanker oiling device10. Network device11. Fully automatic winding machine12. Electric control system: including screw pressure control cabinet, spinning box temperature control cabinet, draft temperature control cabinet, draft frequency conversion cabinet, winding frequency conversion cabinet and conventional electrical control systems.Main features of polypropylene high-strength FDY spinning equipment:1. Monofilament strength: 6.8～7.5g/d2. It can be heated by high-frequency hot roller, with low energy consumption and uniform temperature3. The side blowing wind speed is uniform and stable4. Polypropylene high-strength FDY spinning equipment has stable operation, low failure rate, simple and convenient operation and maintenance......

What are the functional areas of the polypropylene spinning machine? 2021/2/26

What are the functional areas of the polypropylene spinning machine? Generally, the polypropylene spinning machine itself has 4 functional areas.① High polymer melting device: screw extruder.②Melt delivery, distribution, spinning and heat preservation device: elbow, spinning box (melt distribution pipe, metering pump, spinning head assembly).③Thread cooling device: spinning window and cooling sleeve.④Wire collection device: wet oiling mechanism, guide wire structure, winding machine or wire receiving device.The polypropylene spinning machine can be roughly divided into the functional areas described above, but it can be modified according to actual needs.......

丙纶纺丝机于精细处体现智能科技！ 2021/2/26

The function of the polypropylene spinning machine is to make the melted melt enter each spinning box through the bend, and be ejected from the spinning head by the metering pump, and be condensed to solidify into a thread, and continue to be cooled through the tunnel and finally wound into a shape. The polypropylene spinning machine is mainly composed of spinning control system, biphenyl boiler control system, winder control system and so on.The spinning control system of polypropylene spinning machine mainly includes metering pump transmission control, oil pump transmission control, and some on-site temperature and pressure signal acquisition records. Each spinning position on the site is equipped with a button box, and the start and stop of the metering pump and the oil pump are controlled by on-site buttons, so the enable signal of the frequency conversion is generally given by the terminal. Since both the metering pump and the oil pump are synchronous motors, the frequency conversion only requires general open-loop control. The difference between the control of the metering pump and the oil pump is that the metering pump is usually driven by a frequency converter, while the oil pump is driven by a frequency converter.......