Does the textile machine bearing always make noise? Paying attention to these three aspects will be saved! 2019/3/25

Many large textile enterprises will first consider the quality of the bearing when selecting the textile bearing. It is necessary to determine whether the textile machine bearing is stable during use, the failure rate is low, and the service life is longer, but inevitably, some use processes will be encountered. The problem in .The noise problem about textile machinery bearings is a problem that many people want to solve.When the ball bearing works, it will vibrate violently. In many cases, the vibration of the ball bearing will cause a lot of noise, which will have a very bad impact on people's hearing and mood.Today we will analyze why there is such a noise problem.First, the bearing aging is seriousThe excessive load causes the textile machine bearing to age too fast, and there is a certain loss inside the bearing. The intense friction generates a lot of noise.Second, there is a problem in the assembly processProper assembly of the textile machine bearings can ensure the normal use of the bearings. If there is a misalignment, or the assembly error may lead to noise, etc., serious accidents may occur.Third, the textile machinery bearings are not fully lubricatedWithout good lubrication, the friction between the bearing and the bearing sleeve is increased, and noise and other problems are easily generated.Through the above, we can see that the cause of noise in the textile machine bearing is nothing more than these reasons.As long as we strengthen inspections in daily production work and operate in strict accordance with the operating specifications, we can largely avoid bearing failure problems.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

In 2019, these 12 types of textile machinery will be on fire! 2019/2/28

Based on the industry statistics and market performance in 2018, combined with the actual demand of the textile industry in 2019, the following 12 types of textile machinery are worth looking forward to:1, the thickness of the systemIn the current textile industry, faced with difficulties in recruitment and high cost of employment, the advantages of the thin and thin system can save labor, and the more obvious the sales of textile machinery and equipment in many companies in recent years, also reflected Out of the strong market demand for this equipment.The thick and thin system makes the complicated operation simple and easy, and can also realize the collective network control of multiple yarn libraries. On the whole, the thick and thin joint system is expected to become a continuous highlight of the textile machinery market in 2019.2, rotor spinning machineThe rotor spinning machine has a high spinning speed and a large winding capacity. It has good spinnability when spinning low-grade cotton and waste cotton, and has a short production process and can greatly improve the working environment of employees. In the first three quarters of 2018, sales of rotor spinning machines continued to grow at a high rate, and this trend is expected to continue until 2019.3, automatic doffing equipmentAccording to market research, the average age of domestic drowning workers is basically between 45 and 50 years old. It is close to retirement age, and young people are reluctant to do relatively poor work. Automated production equipment replaces labor. The position has become inevitable.As far as the current situation is concerned, the stock of short-distance domestic spinning machines is quite large, and the number of mechanical equipment that needs to be modified is also considerable. The automatic doffing transformation can fundamentally solve the current situation that the doffler workers are not connected.4, automatic management equipmentAt present, the spinning tubes from the automatic winder used by cotton spinning enterprises are scattered in the storage area, which requires manual centralized processing, labor intensity, and the configuration of the automatic winding tube machine becomes the rigid requirement of the automatic winder.The automatic tube management machine can greatly reduce the number of labor, reduce the labor intensity, improve the automation of the equipment, and the automatic operation of the automatic tube machine has low energy consumption, small floor space, high processing efficiency, large processing capacity, and can meet the processing of different yarn counts. The quantity requirements are increasingly favored by cotton spinning enterprises.5, digital printing machineIn recent years, the output of digital printed fabrics has increased year by year, and the output of digital inkjet printing machines will achieve rapid growth. The new generation of ultra-high-speed digital printing equipment is expected to become an important force to promote the transformation and upgrading of the textile printing industry and enhance the international competitiveness of products.Experts in the industry suggest that key enterprises with innovative capabilities and R&D capabilities should adhere to the high-end development route, develop and manufacture high-end equipment, and promote high-speed, ultra-high-speed digital printing equipment.6, low bath ratio low energy dyeing machineThe rapid development of the knitted fabric market, the low-bath ratio overflow dyeing machine, the low-energy airflow dyeing machine and the gas-liquid dyeing machine of both have become the main products of various equipment manufacturers. Water-saving, high-efficiency continuous pretreatment equipment and knitwear finishing equipment have also been welcomed by the market in recent years. It is expected that such equipment will continue to develop well in 2019.7, tenter shaping machineThe range of stenter is extended from traditional woven fabrics to various types of fabrics such as knitted fabrics and non-woven fabrics. In addition, the demand for environmental protection pressure has increased. In recent years, the market demand is large, and it is expected to remain in the next three years. 1200 units / year or even higher output.However, due to rising demand, many companies have entered the manufacturing field of stentering machines. Industry insiders should prevent overcapacity in advance.8, full-form computer flat knitting machineThe trend of consumers' trend is becoming more acute, and the pursuit of high-quality products is also rising. The fully-formed computerized flat knitting machine has become the main equipment to replace the traditional flat knitting machine.With the continuous improvement of the technical level of knitting computer flat knitting machine, the rapid rotation of the machine head, dynamic density, needle bed traversing zero waiting, multi-needle distance and other technologies continue to improve, 2019 full-form computer flat knitting machine will remain the best-selling state, this point It can also be seen from the orders of the key enterprises in the industry.9, intelligent logisticsToday, with the high operating costs of textile enterprises, with logistics management as the core, we promote the development and application of hanging systems, intelligent logistics packaging, intelligent robots, and networked management information systems to realize transportation, storage, packaging, loading and unloading in the logistics process. The integration and the hierarchical structure of the intelligent logistics system will help the company improve quality and efficiency.10, warp knitting machineUnder the guidance of new materials application, the maturity of warp knitting processing methods and the continuous improvement of processing machinery stability, the application field of warp knitting technology is further expanding, and the demand potential of domestic warp knitting machines will continue to emerge.In the future, although the possibility of achieving substantial growth is low, the market for high-speed wide warp knitting machines will continue to show steady growth.11, the texturing machineWith the continuous breakthrough of domestic textile machinery enterprises in the research and development of texturing machine technology, the high-cost domestic high-end texturing machine products have gradually broken the monopoly of foreign products on the high-end texturing machine market. The overall technology of many domestically produced texturing machines has reached the international advanced level, and successfully opened the domestic high-end texturing machine market.In the first three quarters of 2018, the sales volume of domestic high-speed texturing machines increased by 36% compared with the previous year. The market share of high-performance, low-energy, and personalized high-end equipment is gradually increasing. The person in charge of the company is for the texturing machine 2019. The market situation is also more optimistic.12, spunlace production lineBenefiting from the rapid development of the spunlace nonwovens industry, spunlace nonwovens have also developed rapidly in recent years. Domestic spunlace enterprises mainly relying on Eisai products continue to expand production scale, reduce production costs and improve enterprise competitiveness by investing in 10,000-ton hydroentangled production lines with faster production and higher output.Other spunlace companies develop differentiated and functional products through the process of processing, and then maintain their advantages in the competition of certain professional fields, which also led to a significant increase in the demand and requirements for spunlace equipment. Overall, non-woven fabric manufacturers are generally optimistic about the sales situation of the spunlace production line in 2019.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

China Textile Machinery Association will visit European companies during ITMA 2019 2019/2/19

In order to promote the development of domestic textile machinery manufacturing industry and track the world's advanced technologies and processes, China Textile Machinery Association communicated with European related companies to arrange visits and exchange activities, and organized technical inspection teams to visit "2019 International Textile Machinery Exhibition (ITMA 2019). ), during the period, a number of lines visited European related companies.The 2019 International Textile Machinery Exhibition (ITMA 2019) will be held in Barcelona, Spain from June 20th to June 26th. The exhibition is hosted by the European Council of Textile Machinery Manufacturers (CEMATEX). Every four years, the world's major textile machinery and related products manufacturers will participate in the exhibition. The exhibition is one of the most influential textile machinery exhibitions in the world and will reflect the latest technologies, processes and development trends of today's textile industry equipment.Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

This habit determines your development level in 2019! 2019/1/16

Many people like to work overtime in a circle of friends. Sometimes they can even make people feel an illusion, thinking that working overtime is a struggle.I don’t know how to open the gap between people, never sleep late, but get up early, really powerful people, they never go through the morning, but use a morning to open a new day.01The famous writer Haruki Murakami has always insisted on writing, and almost every year new works come out.It is very difficult to do this, relying on his habit of getting up early.Haruki Murakami gets up at 4:30 every morning, does not need an alarm clock, wakes up at the point, and gets quieter in the morning, no one bothers, he can write five or six hours in front of the computer, and work more efficiently than usual. many.When he gets out of bed, he never makes coffee or snacks, but immediately enters work and never pulls.Early in the morning, in addition to let Haruki Murakami develop a habit of doing things without delay, but also let him practice a good body.After the writing is completed, Haruki Murakami will run for an hour. He insisted on getting up and running for thirty-five years, turning himself from a big smoker into a physically strong home, and provided support for his writing career.Haruki Murakami, with long-term early rise, won the life he wanted and created one miracle after another.02The University of Toronto has conducted an experiment in which two groups of volunteers were selected, one consisting of 435 young people and the other consisting of 297 middle-aged and older people.They all filled out a questionnaire about their emotions, physical health, and wake-up time. The results showed that people who insisted on getting up early, whether they were young or middle-aged, had better working conditions.They are healthier and more able to feel happiness in life.Getting up early and sleeping late is actually a very different kind of life. It’s not just your mental state that changes up early, but it also opens up the gap between people and people.Writer Tim Ferris once mentioned in his book a former commander of the US Navy SEALs, Jack Willink, who invited Willing to visit his home and stayed for one night. Early the next morning, Ferris woke up and found that Willink was gone. Later, he found Willink to learn that when he was in the commando, he developed a habit of getting up to 4:45 every day, until now.Ferris puzzled: "You are not in the commando now, why do you still insist on getting up early?"Willink said: "When you are in the army, you always feel that an enemy is waiting for me, so I have to get up earlier than him. Now although I am not in the army, I think that there are so many competitors, when I wake up, they are When I am asleep, I have an inexplicable sense of superiority."Willinger’s sense of superiority stems from his earning more time to study and work in the early morning, and this part of the time has opened the gap between him and others. The consulting company he runs has achieved great success.This spirit of Willink also affected many Americans who formed a "4:45 club" on Twitter to get up early.03"Zengguang Xianwen" has a saying: get up early in Sanguang, get up late and panic.It is said that getting up early in the morning, there is plenty of time to do the things that are going to be done, and the brilliance of the office is easy, and it is easy to get up late, and the things that are going to be done fall away and panic.Many of us like to stay up late because I feel that I have too little time for myself. I work at home during the day. When I arrive at home at 8 or 9 in the evening, I want to use my day and night to make up my own time.In fact, it is at the cost of taking your own health, want to have more time for yourself, getting up early is enough!Start from the early days and give yourself a change:Set a strong goal. Wake up to you is the alarm clock of dreams. A friend of mine, in order to test the human resources certificate, gets up at five o'clock every morning to read the book back information, and then go to work on time at eight o'clock. Because she is late at night, she can use less time and simply move it. Two in one in the morning.sleep earlier. If you want to do more things in the morning, there is a premise that you must have enough sleep, sleep well at night, and get up in the morning. Haruki Murakami went to bed at 9:30 in the evening and couldn't move.Step by step. When you start early, don't use too much force. Get up 2 hours in advance. If you don't adapt, it will make you more tired. Take your time, the first 15 minutes in advance, the second 25 minutes, and the third 30 minutes... Step by step to develop the habit of getting up early.Give yourself a reward. Get up early, you can treat yourself with a hearty breakfast, give yourself a sense of ritual, spiral upwards.A good habit is often just a line, but the things it connects in series will definitely benefit people for life. Get up early, what you earn is your future time, wake up with you, and the long-lost fighting spirit.Looking young, still have timeOvercome your lazinessHurry to realize the unfinished dreamOpen lifeFrom the time you decide to start earlyChangzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

Annual Summary | What are the main themes of the 2018 textile machinery industry? 2019/1/16

In 2018, the textile machinery industry maintained a steady and increasing trend. The main business income and exports still maintained double-digit growth. However, due to adverse factors such as Sino-US trade friction, the growth rate of the industry has slowed down. . Although the overall situation of the market is good, the various segments of the textile machinery are clearly differentiated, and the pressure for transformation and upgrading is still there.In this year, textile machinery enterprises actively responded to market changes, accelerated the pace of scientific and technological research and development, carried out adjustment and transformation, and achieved gratifying results in terms of equipment intelligence, industry self-discipline and improvement of corporate management. In this year, smart manufacturing developed rapidly, and the trend of industrial transfer was obvious. The development opportunities of the industry were also bred.Theme oneIntelligent acceleration layoutIntelligentization is not only an inevitable trend in the development of textile machinery equipment in the future, but also the most important feature of the development of the textile machinery industry in recent years. With the advancement of smart manufacturing related technologies in the textile field, the textile industry has evolved from the intelligence of stand-alone machines to the digitization, automation and intelligence of systems.The exhibition is an important window reflecting the technological progress of the industry. At the 2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition held in October this year, all kinds of exhibits also reflected the progress in the intelligentization of textile machinery equipment:△ The automatic loading technology is put into production and application is an important step in the intelligentization of warping machine technology;△ The application of technologies such as intelligent navigation and network monitoring makes the shuttleless loom more intelligent;△ Warp knitting and finishing using the intelligent yarn system When the yarn on the creel needs to be replaced, the robot replaces the yarn in turn.In general, industrial Ethernet technology is integrated into the core of the textile equipment control system architecture to ensure smoother and more efficient work between different control levels, between systems and within the system; automation product suppliers continue to study textiles The process uses new technologies and methods such as sensing technology, communication technology, computer, system control and artificial intelligence to provide users with a stable, reliable, efficient and energy-saving overall solution.Theme 2Innovative R&D does not stop"There is no way out without innovation." This has become the general consensus of China's textile machinery enterprises. The emphasis on technological innovation and the continuous investment in “real gold and silver” have enabled the textile machinery enterprises to significantly improve their innovation capabilities. In 2018, many companies spoke with new products and new technologies and handed over satisfactory answers.At present, the breakthrough of the key technology of carbon fiber dry-jet wet spinning process can make the spinning speed reach 400m/min or more, and the spinning speed is 5 times that of traditional wet spinning. At the same time, the rapid pre-oxidation technology of dry-jet wet spinning raw silk is also developed. , effectively shortening the pre-oxidation time and greatly improving production efficiency.The “Key Technology Development and Application of Ultra High-speed Digital Printing Equipment” project carries out key technologies for ultra-high-speed digital printing equipment:△ Invented a real-time parallel processing engine for super-large flow digital printing data, realizing ultra-high-speed real-time processing and transmission of digital printing data;△ In response to the problem of fabric deformation and nozzle clogging during printing, a real-time monitoring and control method based on video printing process was invented;△ Invented an automatic detection method for quality defects of printed images based on image quality evaluation model, and successfully developed ultra-high-speed digital printing equipment through video coding and network transmission to monitor the working state of equipment.The improvement of innovation capability and differentiated development are still the focus of future development. This requires us to continue to do a good job in basic work, continuous management, technology and product innovation, improve product quality and product quality.Theme threeIndustry competition is more orderlyAs the conventional equipment market tends to be saturated, problems such as homogenization competition and vicious price wars have become the constraints of enterprises in some fields.Establish an orderly competition order, not low-price marketing and credit sales, in order to safeguard corporate interests and achieve sound development of the industry.In view of the relatively low-priced competitive marketing and credit sales in the field of loom, the domestic main rapier looms manufacturers have signed self-discipline conventions, and enterprises are basically implemented in accordance with the provisions of the self-discipline convention. Since then, the printing and dyeing machinery industry and the circular weft machine industry have issued the "Industry Self-discipline Proposal" or the "Industrial Self-discipline Convention", calling for healthy competition and promoting the orderly and healthy development of the industry.Theme fourEnterprise development upper floorAfter years of market competition and baptism, China's textile machinery enterprises are more standardized and more scientifically managed. Many enterprises have strengthened cooperation with domestic and foreign enterprises and institutions through various forms to further enhance their competitiveness.In 2018, Rifa Textile Machinery acquired Cross Roller, which became the latest case of cooperation and mergers and acquisitions between Chinese textile machinery enterprises and international enterprises. Crosrol is one of the world's leading textile machinery manufacturing companies. As the first internationally renowned textile machine brand to transfer from Europe to China, Crosrol has always insisted on developing personalized products in order to better meet the market demand and rely on the research and development capabilities of Crosrol UK headquarters.On April 17, Shen Fangyong, Chairman of Hubei Tianmen Textile Machinery Co., Ltd. and Zhang Xiaodong, Chairman of Wuhan Huaxia Institute of Technology signed a cooperation agreement on school-enterprise talent training and a cooperation agreement on production, education and research. In recent years, relying on the resource advantages of universities and research institutes at home and abroad, the company has successively implemented strong alliances with Huazhong University of Science and Technology, Donghua University and Uster, and signed a high-speed draw frame for the development of high-speed drawframes. A number of cooperation agreements, such as the system, became Hubei Province's “National Digital Generation Machinery Product Application Demonstration Enterprise”.Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

The construction of the iron construction heavy cotton picker for the first time will be very fruitful. 2019/1/2

On December 20th, Tiejian Heavy Industry Xinjiang Co., Ltd. held the first signing ceremony for the dealers of the first cotton picking machine to watch the order, and sold 20 sets of cotton pickers on site, with an amount of over 50 million yuan.According to reports, the cotton picker that was contracted for sale was developed by Tiejian Heavy Industry Group. It was officially launched in Tiejian Heavy Industry Xinjiang Co., Ltd. in September this year. After nearly three months of trial mining and successfully passed the product identification and appraisal, The cotton picking machine of Tiejian Heavy Industry Xinjiang Co., Ltd. will be mass-produced and sold in 2019. This ordering conference mainly introduces the technical parameters and performance of Tiejian Heavy Industry 4MZ-6 type cotton picker and the sales policy of the cotton picker for the participating dealers and users."China's independent research and development of high-end intelligent 6-row cotton picking machine is off the assembly line, which is expected to break the monopoly of similar products of foreign brands." Xin Xinmin, chief engineer of the Autonomous Region Agriculture and Animal Husbandry Machinery Administration, independently researched and developed in Tielongjian Heavy Industry Xinjiang Co., Ltd. on September 8. The production of cotton pickers at the off-line ceremony said that although the mechanization level of Xinjiang's main crops has been at the leading level in China, as far as cotton pickers are concerned, most of the more than 3,000 cotton pickers in Xinjiang are foreign branded products. There are few cotton pickers, and the advantages of independent technology are not obvious. There is still a certain gap between the requirements for high quality development. The technical breakthrough of Tiejian Heavy Industry Xinjiang Co., Ltd. is of great significance for promoting the development of modern agriculture in Xinjiang.The person in charge of Tiejian Heavy Industry Xinjiang Co., Ltd. introduced that the 6-row cotton picker from the new off-line has been completed from market research and technical reserve to manufacturing for about 2 years. Compared with the traditional 5-row cotton picker, it is not just a single line. Simultaneously upgrade the engine, operating system, etc., and increase the level of automation of the intelligent operating system, the new miner's work efficiency has been greatly improved.At the order meeting on the same day, Tiejian Heavy Industry Xinjiang Co., Ltd. also signed a purchase contract worth more than RMB 50 million with Urumqi Maihe Tiannong Trading Co., Ltd. and Hutubi County Xingfeng Agricultural Machinery Sales Co., Ltd. respectively. plaque."I feel very honored to be a dealer of Tiejian Heavy Industry. I hope that we can work together to make this product a booster for the development of cotton farmers in Xinjiang." The head of Hutubi County Xingfeng Agricultural Machinery Sales Co., Ltd. said excitedly.It is understood that Tiejian Heavy Industry is the first large-scale central enterprise to develop high-end intelligent six-row cotton picker. The model of this line of picking machine is 4MZ-6 self-propelled cotton picker, with a total of 6 cotton picking heads. The responsible person of the Tiejian Heavy Industry High-end Agricultural Machinery Research Institute, which is responsible for the research of this project, calculates an account: generally 1 to 300 acres of seed cotton can be produced, ordinary skilled workers can pick up up to 80 kilograms of cotton per day, and 6 rows of cotton pickers 10 About 400 acres of cotton land can be picked in an hour, and the total efficiency of 6 rows of cotton pickers is equivalent to about 1200 artificial picking.Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

Take a look when you are confused! Ten habits of self-management! 2018/12/20

The biggest enemy of man is often himself. What a person eventually mixes, the big reason is that he is caused by mediocrity or achievement, just what he did when he was confused.Many people say that I don't know what to do and how to do it. Then, Xiao Bian suggests that you should do yourself first, manage yourself, and develop the ten self-management habits.01Handle the emotions first, then deal with thingsNapoleon said that those who can control their emotions are greater than the generals who can win a city.Dealing with emotions first, then dealing with things, people doing things when their emotions are out of control, often end up regretting.If you encounter unhappy things at work, don't complain to your colleagues, you can't solve problems, and it will cause more troubles; let alone face conflicts with leaders, because the results will often make you more painful.It is not for you to accept it, not to have temper, but to weigh the advantages and disadvantages, not to infinitely enlarge the already bad things, until you can't afford it, regret it.90% of the misfortunes in life are because you can't control your emotions very well, work so, and life is the same.02Manage time, don't be ruinedLiang Shiqiu said that no one does not care for his life, but few people cherish his time.The gap between people is widened, largely depending on how they use time.Good people always invest in themselves and accumulate life; while those who are mediocre tend to eat, drink, and enjoy life.Please keep in mind that young days are not long. If you lose your money today, you will lose forever and will not return.Suggestion: Uninstall applications that may ruin your time, such as games; don't do "Mr. Stepper" or "Miss Just Miss" ten minutes in advance.03Adjust your mind and always hopeWhen people are in a trough, they are often accompanied by anxiety and despair. Because life is never a straight line, there will always be ups and downs, and there are many unsatisfactory things.The secret of life is that the more desperate you are, the more it bullies you; the more optimistic you are, the better it treats you!We always say that attitudes often determine the success or failure of a thing, because if you give up, it really ends.I really like the words of Wilde: Even if you are in the gutter, someone is looking up at the stars.04Take care of your mouth and talk wellLuo Zhenyu said that in the workplace or in contemporary society, the most important ability is the ability to express!As the saying goes, the disease comes from the mouth, and the evil comes from the mouth. The first impression a person gives to others often begins at the moment when he speaks. Someone speaks like a spring breeze. When someone opens, it makes people feel uncomfortable.Those who can talk often have a better life.Suggestion: Manage your mouth, talk less and listen more; before you speak, first pass your brain and change your position to think about other people's feelings.05No delay: today's business, today'sMany people are always used to dragging today's affairs to do tomorrow, both anxious about the current predicament, but unable to act.Your arrears today will become future debts, and what you delay will eventually end up.Suggestion: List the important to-do items of the day every morning, not to fight, but to do today's business, today.If one day you are no longer procrastinating, the confusion will leave you.06Investment ability, maintain competitivenessIn this era, you want to get out of the confusion, only relying on talent and ability, this is also the most reliable key to breaking.It's time to step out of the comfort zone, invest in your ability, recharge and learn to keep yourself competitive.Someone asked, I am confused, I don’t know what to learn?If you don't learn anything, you can't talk, you can learn to speak; if you don't speak English well, you can learn English; if you don't do well, and your efficiency is not high, then you should improve your work skills and find efficient methods...When you are good enough, the road ahead will be wider and wider.07Invest in the body and stick to exerciseAs the age grows, more and more people understand the importance of health, and at the same time, they must pay attention to health.In exchange for health, it is a very uneconomical deal in the long run. The savings you have worked hard for many years may be thrown to the hospital overnight.If you can't make money for a while, then hope that you can have at least a good body.Struggling and investing in the body are not in conflict, but you don't know how to weigh and arrange.It is recommended that you take an hour of exercise every day, staying up late!08List goals and make a clear personMany good people are very clear people. He knows what he needs and knows what he is doing for it.Someone gave up the superior treatment of a big company and turned to a small company with a flat salary because he knew what he needed at the current stage. He wanted a quick improvement in his ability to do things, and small companies had more opportunities.I hope that you can list your target on a night of insomnia, and the big goal can be broken down into small goals.Determining the direction of running is often more efficient and more meaningful.09Wealth management, don't waste moneyWhen you are poor, you need to manage your wealth. Every penny has to be counted, and you have to spend a limited amount of money on the cutting edge. Don't spoil.When you have a certain economic foundation, you also need to manage wealth and use money to make yourself more valuable, such as renting a house close to the company; reporting an English tutoring class; and buying two sets of socially-friendly clothes for yourself; Buy gifts for your lover and parents...When your economy is more affluent, you also need to manage your wealth. Don't let the money lie there and lose value.The more people who use wealth, the faster they rise!10Reading a book every day, no successFinally, it is recommended to take one hour a day to read the book.Many people don't like reading books, and they don't want to go in, but they still have to tell you: people who read books and don't read books are always two levels.This has nothing to do with success. It is related to temperament, talk, cultivation, learning, and mood. Maybe you haven't earned much money when you read a lifetime book, but your heart will be rich and full.Measuring success is not just money and rights, but also a soul.At the end of life, you can be less successful, but you should be a person who knows how to work hard, a person who is full of heart, and a happy person.These ten self-management habits determine what a person's life will eventually be!Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

Who is grasping the mainstream and hot spots in the development of printing and dyeing equipment? 2018/12/20

Environmental protection, energy conservation, digital monitoring and intelligence are the top priorities in the development of printing and dyeing machinery. From the 2018 China International Textile Machinery Exhibition and ITMA Asia Exhibition exhibits, it can be seen that in the new development stage, the digital monitoring technology and equipment for printing and dyeing process will have a lot of room for development. The new technology will change the production and management of the traditional printing and dyeing industry. Mode, improve production efficiency and save resources. The establishment of a digital monitoring system for printing and dyeing workshops to achieve full-process data collection will become the mainstream direction in the future.In the development of printing and dyeing machinery, the range of application of tenter setting machine extends from traditional woven fabrics to various types of fabrics such as knitted fabrics and non-woven fabrics, and the market demand will remain high. Intermittent dyeing equipment will continue to develop low-water ratio technology and low-water consumption technology after dyeing. The rotary screen and flat screen printing machine will still be the mainstream printing equipment, and the digital inkjet printing machine is the development hotspot of the textile machinery industry.CNC technology to improve the level of printing and dyeing machineryWith the automation level, energy saving and emission reduction effects and manufacturing quality of domestic printing and dyeing equipment, many new digital printing and dyeing equipments have reached the international advanced level, and the market share has reached more than 85%. New products and technologies introduced by domestic and foreign companies have made progress in energy-saving emission reduction, clean production and digital technology application, all showing the development direction of printing and dyeing machinery intelligent technology.The Hengxinmen Fuji Montex 6500 Air Filtration Omni stenter from China Hengtian Lixin International Co., Ltd. combines the most advanced heat recovery and air filtration system technology. The modular design makes it more adaptable to different factory space requirements, and the device also has an intelligent control automatic cleaning function, which is moved back and forth on the collecting trough by a movable nozzle to clean the conventional filter tank.The SOFTA high-speed sanding machine from Sanderson Lima Group offers the most advanced sanding solutions for all fabrics. The high-speed sanding process is suitable for woven and knitted fabrics, and can be single-sided or double-sided sanding according to different needs. SOFTA sanders can handle different fabrics made from natural or man-made fibers.The application of advanced numerical control technology has laid a good foundation for the promotion of intelligent printing and dyeing system. The application of digital production monitoring system, digital pulping and automatic distribution system can not only ensure the preparation accuracy and reproducibility of dyeing materials, but also clean it. Production, reducing the labor intensity of workers and stabilizing product quality have also been recognized by more and more users.Hengtian Lixin and the door Fuji Group jointly demonstrated the Qualitex 800 control system. When used with the Web-UI application, the remote visualization of Monforts technology equipment can be realized through a smartphone or tablet computer. This system simplifies the process, reduces the time required for the operator to become familiar with the new system, and provides complete control over all machine parameters.The automatic computerized pulping system exhibited by Hangzhou Open Source Computer Technology Co., Ltd. is equipped with a self-developed hard joint telescopic intermediate hair distribution as the core distribution system, unattended mother liquid storage system, and paste preparation system for loading automatic powder feeding device. Automatic weighing and chemical system, and the international level of printing automatic adjustment.The application of numerical control technology has also gradually improved the process flow of knitted fabric continuous wet processing equipment, making it easier for users to accept. Zhejiang Lianke Machinery Co., Ltd.'s continuous bleaching washing machine has a high degree of automation control, and the whole machine production operation is fully automatic, including production data visualization, historical record query, production consumable warning prompt, equipment failure list prompt, etc. The control system is configured with process recipe management functions to improve operational simplicity.In addition, at this exhibition, the number of visual inspection equipment for printing and dyeing machinery increased significantly. Changzhou Hongda Electric Co., Ltd. and Shaanxi Changling Textile Electromechanical Technology Co., Ltd. exhibited a prototype of automatic inspection machine, which can be seen as an alternative to manual inspection. The development of this technology is being promoted.Energy saving and emission reduction is still the main line of printing and dyeing equipment developmentEnergy conservation and emission reduction will continue to be the main line of development of printing and dyeing machinery technology. The national environmental protection policy has been tightened and printing and dyeing enterprises have moved into the park, making energy-saving printing and dyeing equipment the mainstream of development.The eighth generation energy-saving and environmental protection hot air tenter setting machine displayed by Yuanxin Industrial Co., Ltd. is equipped with automatic filter net device. Through the rotary filter screen, the online and gap type dust dust is automatically filtered and processed centrally to ensure the inside of the drying room. The smooth flow of the air duct, while reducing the labor intensity of employees; the thermal energy reuse device, through the heat exchange fluid in the heat exchange tube for efficient heat exchange, to achieve thermal energy recycling, effectively reducing energy consumption and emissions.STORM's new environmentally-friendly gas-liquid atomization dyeing machine exhibited by Deyijia Machinery Jiangsu Co., Ltd. can realize three functions of airflow atomization, gas-liquid dyeing and overflow dyeing, compared with similar products on the market: low-energy double-outlet system The power consumption of the tube is as low as 3.5Kw; the wind power is increased by 30%; the width of the floor is reduced by 1.5~2 meters; the trouble-free operation time of the fan is extended by 50%. The KOALA Circulating Environmental Dyeing Machine has a minimum bath ratio of 1:4. At the same time, the T series has been launched for thick and heavy terry cloth, which has made a major breakthrough in the leveling of fabrics that are easy to crease. The fifth generation of the new KOALA plus model increases the single-tube load to 350KG.The TH-LA-B series ultra-low bath ratio energy-saving dyeing machine of Wuxi Tonghua Dyeing and Finishing Machinery Co., Ltd. can have a bath ratio as low as 1:4 to 1:5; the capacity can be increased by about 50% on the basis of the original. The built-in composite reducer guide tube minimizes tension and effectively removes the warp crease.“Waterless dyeing” is an ideal target for the printing and dyeing industry and dyeing machine manufacturers, but the key technologies are still unconquered. The “waterless low-carbon and less-duty dyeing machine” exhibited by Dongguan Jinyinfeng Machinery Industry Co., Ltd. has attracted the attention of the industry. The “nano-scale” disperse dyeing solution and special equipment developed by Jinyinfeng Company explored an efficient and water-saving way for continuous dyeing of polyester woven fabrics for non-clothing and home textiles.Personalized customization makes printing and dyeing equipment more attractiveWith the improvement of the intelligent level of printing and dyeing equipment, personalization has become a hot spot in the market. In recent years, with the market's rapid response, rich colors, customizable production, and environmentally friendly advantages, the technology of digital inkjet printing machines has been rapidly developed, and new models have emerged in an endless stream, including high-precision reciprocating scanners and high-speed singles. -Pass equipment, both screen printing + digital inkjet combined machine, also has a wide paper machine. Domestic inks have made rapid progress and promoted the development of digital inkjet printing industry. Active water is the mainstream of digital printing, and the application of coating ink is gradually expanding.The VEGA3000P ultra-high-speed digital printing machine exhibited by Hangzhou Honghua Digital Technology Co., Ltd. has the advantages of low-cost and low-cost products. It adopts a stable machine structure and is equipped with industrial-grade high-precision nozzles. It can support 4 colors and 6 colors, and supports 1.8. Rice and 2.5 meters wide, the daily output is up to 10,000 meters. Intelligent management of output and ink volume can be realized in daily use, which effectively saves ink consumption and supports different transfer media such as 48g, 80g, 100g. Smooth and efficient continuous belt transfer medium, automatic constant tension synchronous unwinding and linear motor can be more worry-free and assured in digital printing production, with Honghua special color management software.The T-Press printing machine of Black Mai Digital Technology Co., Ltd. uses KONICA TP9 nozzles and supports 16/32 nozzles. The printing speed is higher. The machine adopts a variable point ink drop nozzle, an interval flashing automatic maintenance system, an automatic retractable cloth tensioning system, a guide belt automatic cleaning, and an infrared heating drying. The machine is suitable for roll-to-roll material, the widest width is 1.85 meters, suitable for cotton, silk, hemp, polyester and other fabrics, 4/6/8 color ink is optional.The combination of strong and strong, expanding the field of equipment application is also a new trend in the development of printing and dyeing equipment. The rotary digital combination machine of Fujian Haolong Machinery Technology Co., Ltd. can realize the functions of rotary screen and digital mixed printing, and can fully utilize the advantages of two printing modes: rotary screen printing and digital printing.The equipment has low production cost, and the digital printing ink usage only needs about 30% of the pure digital printing ink usage; there is no need to increase the number of printing passes to make up for the large color of the digital printing machine which is prone to printing problems; special printing can be realized Special printing of plastics that cannot be completed by digital printing; greatly reducing the cost and time of production of rotary net/flat screen.Changzhou Fubang Chemical Fiber Machinery Factory mainly produces: polyester industrial yarn spinning combined machine, polyester POY spinning machine, polypropylene FDY spinning machine, polypropylene FDY production line, polypropylene FDY equipment, polypropylene FDY machinery, polyester industrial yarn spinning combined machine, Polyester FDY spinning machine, polypropylene spinning machine, polyester FDY production line, polyester FDY machine, nylon FDY spinning machine, polyester industrial yarn spinning machine.......

There is a flaw in the maintenance of the double-twisting machine. Have you done it? 2018/12/10

Machine maintenance is an indispensable part of daily production. The quality of machine maintenance directly affects the quality of the product, so the content and standards of maintenance are very important. The following are the parts that the double twister needs to check frequently:NO.1Spindle sectionCheck the flexibility of the spindle operation:1. Remove the spindle; 2. Grasp the stationary disk and gently rotate the rotating disk to check if the rotation is flexible? Is there an abnormal noise? Is it lack of oil?If abnormal spindles are found, they are processed in the following order:1 Pull out the stationary disc (cartridge binder) to separate the stationary disc from the disc.2 Check if the spindle bearing is wrapped with waste wire, remove if necessary, and check the flexibility of the bearing.3 There is no yarn winding, but the bearing rotation is not flexible; or the bearing rotation is still inflexible after removing the yarn, the special bearing is needed to remove the bearing and replace the new bearing.4 Use a special clamp to hold the inner ring of the bearing and press the bearing.5 After re-applying the apron on the bearing, press the stationary disc.If the spindle is short of oil, it should be refueled immediately.NO.2Dragon belt partCheck if the dragon belt has abnormal noise, whether it is swaying up and down, whether it is wrapped with yarn, or whether it is stained with oil.The abnormal sound of the dragon belt indicates that the operation has been abnormal, or the yarn is wound. To check that the dragon belt does not touch the lowest part of the introduction, if it is necessary to adjust the height of the tensioning guide wheel, adjust from the side of the active belt pulley. When the right hand is turned, the dragon belt rotates clockwise, so start the inspection from the active belt pulley when adjusting, and check it clockwise one week.The ups and downs of the dragon belt are also caused by the poor position of the tensioning guide wheel. If the yarn is wrapped around the dragon belt, it can be disposed of when it is stopped in a small amount. If it is large, it needs to be dealt with immediately. Otherwise, the dragon belt will slip and abnormal noise will occur.When the dragon belt is seriously polluted, the spindle speed will decrease, the belt will slip and an abnormal sound will be emitted. Therefore, the belt should be removed and cleaned with a neutral detergent.NO.3Tightening guide wheelWhen the belt is driven, the outer side of the guide wheel and the inner side of the belt are tightened. The main function of the tension guide wheel is to maintain the tension of the belt to ensure that the transmission does not slip.When tightening the guide wheel, make sure that the tensioning guide wheel is flexible. If the tensioning guide wheel is not flexible, it will wear the belt. At the same time, it is necessary to ensure that the tensioning guide wheel drive is stable.If the dragon belt is too high at this time, you need to adjust downwards. The steps are as follows:1 Loosen the fastening screw;2 Loosen and lift the left lifting screw, then unscrew the right lifting screw;3 Tighten the fastening screws. Generally, the adjustment range of the dragon belt is very small, and the position of the dragon belt on each tensioning wheel is as good as possible.Double twisting machine refueling situationRefueling standard, refueling cycle, refueling method, refueling quantity, oil typeSpindle every six months tanker 4.5 spindle oilIn-spindle bearing 18 months Hand wipes Spread even Low-torque high-speed grease (2# oil)Tightening guide wheel 2 years hand wipe moderate amount of ordinary butterWorm gear reducer 1 month Oil gun Appropriate amount 320~SS～100 special gear oilGear surface, change gear 1 month, hand or grease gun, evenly spread, ordinary butterOverfeed roller chain forming cam chain rotation and reciprocating parts 1 month Oil gun or brush Evenly spread 100# Lubricating oilShifting rod sliding sleeve 3 months Oil gun or brush 2~3 drops 100# Lubricating oilTwisting gear bushing nozzle Every day Oil gun 4~5 drops 100# Lubricating oilRefueling is an important measure to reduce mechanical wear. Refueling should be regularly quantified. After refueling, it should be checked frequently to prevent leakage and increase. It is necessary to ensure the need for mechanical lubrication and not to waste oil. Be sure to be hygienic after refueling and keep the machine clean.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

News | Fubon warmly congratulates the 2018 polypropylene annual meeting! Collision of thinking, seek common development, gather again next year! 2018/11/20

In order to stimulate the new momentum of the development of the polypropylene industry, on November 15, the "2018 polypropylene branch annual meeting and polypropylene industry high-quality development forum" was held in Jieyang, Guangdong. Fubon was fortunate to be actively involved as a support unit, and warmly congratulated the polypropylene annual meeting!More than 100 participants took a group photoOn November 14, Changzhou Fubon Chemical Fiber Machinery Factory was invited to attend the industry event and signed a photo at the registration office.Duan Xiaoping, Vice President of China National Textile and Apparel Council, President of China Chemical Fiber Industry Association, Liu Duanxiong, Deputy Mayor of Jieyang Municipal People's Government of Guangdong Province, Zhong Jinhong, Standing Committee Member of Jiedong District, Jieyang City, and Director of Economic Information Technology and Technology Bureau of Jiedong District, Jieyang City More than 180 people including Zheng Chuanghui and other industry experts, researchers, and industry upstream and downstream entrepreneurs attended the meeting.The conference was hosted by China Chemical Fiber Industry Association, China Chemical Fiber Industry Association Polypropylene Branch, Guangdong Mengtai High-tech Fiber Co., Ltd. and China Polypropylene Network.The meeting was hosted by Zhao Xiangdong, vice president of China Chemical Fiber Industry Association.The conference focused on promoting supply-side structural reforms and promoting high-quality development of the industry, and conducted in-depth exchanges on current market competition, trade friction, new product development, and green development.The meeting scene can be described as a meetingleader's speechDuan Xiaoping ChairmanDu Xiaoping, vice president of the China National Textile and Apparel Council and president of the China Chemical Fiber Industry Association, pointed out in his speech that after 40 years of reform and opening up, the chemical fiber industry has created unprecedented profound changes and achieved remarkable results. China has become a global The most complete and largest chemical fiber production, consumption and exporting country in the industry chain.Polypropylene is a small variety in the chemical fiber industry, but it is also an industry with excellent performance and green production process. According to the statistics of the National Bureau of Statistics, in 2012-2017, the actual output of nearly 50 enterprises above the scale of China's polypropylene is stable at around 300,000 tons, less than 1% of the total output of synthetic fibers, which is a small proportion of synthetic fibers. It is mainly distributed in Jiangsu, Zhejiang, Shandong and Guangdong in the southeast coast.Due to the excellent performance of polypropylene, its application in specific fields such as ropes, ribbons, nonwovens, geotextiles, adobes, and high-end sportswear has maintained a steady development in recent years. Compared with the application of foreign polypropylene in industrial and high-end sportswear, this is also the growth point of our future industry. The development of new technologies, new equipment, intelligent manufacturing, Internet +, functional and high value-added products is the responsibility of our new generation of polypropylene people.Deputy Mayor Liu DuanxiongLiu Duanxiong, deputy mayor of the People's Government of Jieyang City, Guangdong Province, introduced the industrial development trend of Jieyang City in Guangdong Province in his speech. He pointed out that Jieyang is a manufacturing city in Guangdong and a private economy. It has traditional industries such as metal, petrochemical, textile and garment, food and medicine. Among them, Sinopec and textiles and garments are pillar industries of Jieyang, with a sound industrial chain, including textiles. The output value of chemical fiber clothing reached more than 130 billion yuan.At present, the total investment of 65.43 billion yuan, annual production of 20 million tons of refining + 1.2 million tons of ethylene + 2.6 million tons of aromatics refining and chemical integration, as well as textile printing and dyeing environmental protection integrated processing center and other major projects to accelerate, will certainly drive the realization of petrochemicals and The extension and reconstruction of the chain of the textile and garment industry has also brought important opportunities for the development of the chemical fiber industry and created favorable conditions.In the future, Jieyang will insist on serving enterprises and projects as the top priority, further improve the support measures for private enterprises and small and medium-sized enterprises, comprehensively optimize the business environment, and help enterprises solve practical problems. I hope that this meeting will be an opportunity to focus on major projects, plan cooperation and cut through, create mutual benefits and win-win, and work together to promote the high-quality development of the chemical fiber industry.Academic exchangeSubsequently, experts and scholars from the upstream and downstream of the polypropylene industry and representatives of enterprises came to the stage to give speeches, pushing the atmosphere of the conference to one climax.Mr. Huang listened carefully to the speeches of experts and scholars in the audience.During the period, Mr. Huang gave a speech on the topic of “On the status quo of polypropylene equipment and intelligent development proposals”. The whole process was impassioned and eloquent, and everyone was moved to the audience.Mr. Huang gave a speech on stageMr. Huang’s speech analysis compares the high-speed spinning and energy-saving polypropylene equipment of several chemical fiber equipment companies such as China Textile Science Research Institute Co., Ltd., Beijing Zhongli Machine Engineering Technology Co., Ltd. and Beijing Shengbang Xinyuan Chemical Fiber Machinery Co., Ltd. It is said that automatic material preparation, high-speed spinning and automatic packaging will be the development direction of polypropylene intelligent equipment, which will solve the problem of high labor cost, low equipment occupation, high efficiency, stable finished product quality, reduced comprehensive cost, energy saving and efficiency.Finally, I shared my experience in visiting the textile machinery exhibition this year. It is pointed out that China's chemical fiber industry is currently at the key stage of transformation and upgrading. From traditional production to intelligent manufacturing, reducing the production cost and labor cost of the chemical fiber industry is becoming an important direction for chemical fiber machinery technology innovation. Therefore, the development of chemical fiber machinery has attracted much attention. The new equipment can make production more efficient and energy-saving, more intelligent, digital operation indicators, online addition of functional masterbatch and finished product inspection, products are more diverse, product defect rate is significantly reduced, fiber quality is further improved and more stable.Professor Chen Long of Donghua University shared research and development status and development trend of chemical fiberGao Chunyu, a senior researcher at the Beijing Research Center of Dalian Commodity Exchange, analyzed the development trend of China's polypropylene industry in 2019.Gu Qingliang, a professor at the School of Management at Donghua University, introduced the background of the Sino-US trade war and its impact on the Chinese textile industry.Situ Jianye, deputy director of Guangdong Chemical Fiber Research Institute, analyzed the road to innovation and transformation of chemical fiber industry in the Pearl River Delta region.Cai Zhengguo, a professor at the School of Materials Science and Engineering at Donghua University, shared the structural design, synthesis and application prospects of functionalized polypropylene.Wang Min, senior engineer of Beijing Zhongli Machine Engineering Technology Co., Ltd., analyzed the special project of "Chemical Fiber Engineering Project Specification"Guo Renqi, Director of R&D of Guangdong Mengtai High-tech Fiber Co., Ltd. introduced the application of island composite polyolefin fiber in lithium battery filmLi Changqi, Chairman of Jiaxing Shengbang Machinery Equipment Co., Ltd. analyzed a method for rapidly increasing the polypropylene spinning equipment to the international level.Huang Yangming, Technical Director of China Polypropylene Network, shared the topic of management and optimization of polypropylene enterprise inventoryIn the same period, it also held 2018 polypropylene industry chain high-quality development achievements display, Changzhou Fubang Chemical Fiber Machinery Factory, Guangdong Mengtai High-tech Fiber Co., Ltd., Zhejiang Jincai New Material Co., Ltd., Jiangxi Donghua Machinery Co., Ltd., Shenzhen Zhongtianxin Textile Technology Co., Ltd., Guangzhou Junte Chemical Co., Ltd., Yancheng Ruize Masterbatch Co., Ltd. and Yancheng Xinle Machinery Technology Co., Ltd. demonstrated the company's technological achievements, development concepts and strategic planning.As a support unit of this annual meeting, Fubon is invited to attend this industry event and give a speech. We are very honored! At the meeting, the guests collided with the spark of thinking, stirred up the innovation and vitality, and the speeches were wonderful and the exchanges were full!We will also base ourselves on the polypropylene equipment industry. We must face up to difficulties and strengthen our confidence. We will continue to promote technological progress and industrial upgrading, and make new contributions to the development of the polypropylene industry!Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

What are the key factors that affect the quality of the finished product during spinning? 2018/11/9

There are many factors affecting the quality of the finished product during weaving. Among them, the “mechanical tension on the warp yarn” is a key factor. The improper tension on the warp yarn not only directly affects the operation of the production, but also seriously affects the quality of the product. Its impact on the quality of products generally has the following three aspects:1. Influence on the rate of broken endsWhen the warp yarn exits from the warp beam to the woven fabric, it has to be stretched and rubbed thousands of times by the guide roller, the heald, and the steel shovel. The tension on the wire is increased, which is easy to cause fatigue and breaks in the weak link of the warp. Therefore, excessive machine tension is the main cause of warp breakage.Some people have tried a certain fabric, adjusted the tension on the warp, the flatness, the position and other related factors, so that the yarn breakage rate is reduced from 0.839/set·hour to 0.175/set·hour. . Can you think that the lower the tension on the machine, the lower the break rate?After analysis, the beating on the general fabric is not 90°, so the beating force can be decomposed into the force F in the direction of the fabric and the force f in the direction of the vertical fabric. When the wefting force is constant, if the warp tension is reduced, Then, the beating force F in the direction of the silk surface is bound to decrease, and the fabric forming zone and the beating zone are all increased.In this way, the friction between the warp and the heald is increased, and the warp is caused by the phenomenon of “choking” in front of the steel shovel, which leads to an increase in the broken head. Therefore, the warp tension of the warp is too small. Weaving is also disadvantageous.2. Effect on fabric shrinkageIf the warp tension is large, when the warp and weft are interlaced, the warp of the weft is increased due to the warp of the warp, and the internal stress of the weft increases.When the fabric is wound into the take-up roll, especially after the machine is removed, the tension of the warp yarn disappears, and the weft yarn will exert a large back pressure on the warp yarn due to the "resistance" effect of the internal stress, thereby forming an increase in the warp shrinkage rate. The case where the latitudinal shrinkage rate is reduced.3. Influence on fabric feel and appearanceThe tension of the warp machine has a great influence on the feel and appearance of the fabric. If the tension of the warp machine is properly controlled, the silk surface of the fabric is flat, the texture is clear and the hand feels good; and the warp tension is too large due to Excessive elongation, the silk surface is not full enough, and the tension on the warp machine is too large, the fabric is likely to produce a "slim mouth".Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......

Polypropylene spinning machine companies want to retain the hearts of employees, the secret lies in ..... 2018/10/31

Many CEOs often complain that employees are not loyal to the company, but rarely think about why employees are not loyal, because loyalty is always two-sided, reflecting the state of cooperation between the boss and the employee.Employees' loyalty to the company is gradually established in the process of cooperation and development between employees and enterprises, rather than in one go. This kind of loyalty is not required or stipulated by the enterprise, but is gradually generated on the basis of mutual loyalty. of.To a certain extent, corporate loyalty should be done in the front. Enterprises use their loyal and specific behaviors to win employees' loyalty to the company. This is the real connotation of improving employee loyalty.Where does employee loyalty come from? This is a big problem, and Xiaobian summarizes the following points:First, respect from the enterpriseTo a certain extent, enterprises and employees are equal cooperative relations, employees respect enterprises, and enterprises must respect employees. This is the basic requirement of modern enterprise management.If a company respects its employees and always regards employees as the most valuable asset of the company, then employees must be grateful to the company; otherwise, if a company despise employees, it only regards employees as a tool for making money, and it is “disappearing to employees”. Employees, then employees will never have loyalty.Second, trust from the enterpriseTrust is the basic condition for employees to establish cooperation with enterprises, and it is also the basis for improving employee loyalty to enterprises. Lost trust, between employees and enterprises can only be regarded as a deviance, and even can not come together to cooperate.This kind of trust is not only reflected in the old employees, but also in the new employees. Even the employees during the trial period should also give basic trust. This kind of trust often affects the loyalty of individual employees and corporate teams.Third, from the care of the companyEmployees and enterprises are not naked interests, but should have more colorful content, such as the company's care, support, and help to employees as always, which will make employees feel grateful. From the support of work, the care of life to the help of the family, and sometimes the humanized treatment of employees' mistakes or faults, these subtle cares can capture the "loyalty" of employees.Fourth, the reputation from the enterpriseThe reputation of the company is very important to the employees. A good reputation will make the employees believe in the company, rely on the company, and dedication to the company.When it comes to credibility, the minimum is to talk about integrity, to be a promise, to say that to do it, we must first honor the treatment of employees, in the absence of violations, we must not arbitrarily deduct the treatment of employees. Occasional financial difficulties are in arrears, and they must be open and honest, communicate fully with employees, win the understanding of employees, and explain the exact redemption time.As for the credibility, it is also very important that the company evaluates in the industry and society. These are all about the employee's recognition or loyalty to the company.V. Reuse from the enterpriseEvery employee wants to be a "person" in the company. They are always eager to do their best and make the best use of their talents. They always want to make a difference and make a difference in the enterprise through their own efforts.Probably every employee wants to be fully recognized by the company. They hope that they will be assigned to the right departments and positions in order to develop their expertise and talents, and hope that they will be appreciated and valued by the company and the president.In the enterprise, when employees are reused, they will be grateful and will be loyal to their duties and loyal to the company.Sixth, the treatment from the enterpriseThe generous treatment is a magnet for attracting employees, and it is also a prerequisite for employees to settle down.These treatments include basic wages, rewards, commissions, subsidies, shares, housing supplements, car repairs, insurance, benefits, etc., and the generous treatment can make the employees "both come, then peace of mind" and put all their energy into their work. With no worries, be proactive, and realize your potential, you will do your best to do your job with one heart and one mind.Seven, the charm from the bossAttractive CEOs are always able to unite employees, improve morale, lead employees to attack the city, win the enemy, and build merits and achievements in the fierce market competition.Attractive CEOs will make employees feel motivated, hopeful, and motivated by employees, even if they are faced with difficulties, because employees believe that difficulties are only temporary, and CEOs must have ways to lead employees to overcome difficulties and seize victory!Employees always fear the charismatic CEOs, and they will also be loyal to the companies led by the bosses.Eight, understanding from the enterpriseThe death of a confidant is also true in a company. If a company can truly understand employees and understand what employees think, say, do, and need, they must understand the difficulties and difficulties faced by employees. Communicate, then coordinate or help employees solve confusion, then employees will regard the company as a "confidant."In particular, companies must not devalue their employees when they “fail”. Instead, they must work hard to help employees analyze the gains and losses, find out the reasons, encourage employee morale, and make employees move out of their difficulties. success. The company understands the employees and truly understands the employees' hearts. The employees will naturally be loyal to the company.to sum upLoyalty is the traditional virtue of our Chinese nation. Since ancient times, there has been a saying of "heart-to-heart" between people, and so is the current enterprise. If the company treats its employees with sincerity, employees will definitely use loyalty. The heart is to return the business.Changzhou Fubon Chemical Fiber Machinery Factory mainly produces Polypropylene spinning machine, Polypropylene FDY Spinning Machine, FDY Spinning Machine, Polyester FDY Spinning Machine, Polypropylene spinning machine, Polyester FDY Production Line,  Nylon FDY Spinning Machine, Spandex Spinning Machine, Spandex Equipment, Spinning Parts, Dacron Small Testing Machine, PP Small Testing Machine,  Polypropylene spinning machine.......